Towers & Site Hardware

Specifications General Specifications Application Outdoor Color Silver Dimensions Compatible Diameter, maximum 76.2 mm | 3 in Compatible Diameter, minimum 33 mm | 1.299 in Material Specifications Material Type Galvanized steel Packaging and Weights Included Brackets | Clamps | Hardware | Sway brace Packaging quantity 2 Weight, net 5 kg | 11.023 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system

ROHN BPC25G Plate for Concrete Pier Tower Placement The BPC25G uses a 3/4" x 12" pier pin to align the plate to the slab (Separate Item) for Guyed ROHN 25G Tower installations only. This Rohn Base Plate is 15 inches Square and 3/16 Thick, allows the ROHN 25G Tower to be Mounted onto an existing or new Concrete Pier, but Cannot be Used as a Self Supporting Base Plate (see R-25GSSB). This Tower Base uses double bolted joints which are proven to be the best method of joining tower sections...

Rohn HB25BG 25G HOUSE BRACKET ASSY, ADJ 0" TO 24" The ROHN R-HB25BG adjustable house mounting bracket for Standoff from House Wall up to 24 inches. This ROHN Tower HB25BG House and wall bracket offers greater support for ROHN Guyed, Bracketed and Self Supporting 25G Tower installations and is adjustable up to 24 inches. Comes with Adjustment Bolts and Rail Clamps. The ROHN 25G tower can be in used in guyed, self-supporting or bracketed configurations according to specifications in the...

Specifications General Specifications Application Outdoor Color Silver Dimensions Compatible Diameter, maximum 76.2 mm | 3 in Compatible Diameter, minimum 33 mm | 1.299 in Material Specifications Material Type Galvanized steel Packaging and Weights Included Brackets | Clamps | Hardware | Sway brace Packaging quantity 2 Weight, net 9.5 kg | 20.944 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system...

ROHN's R-APL55G assembly plate and top beacon plate is designed for use with the Rohn model 55G tower sections. It bolts directly to the top of a standard Rohn 55G tower section and can be used for mounting a beacon light or other similar piece of equipment at the top of the tower. Each R-APL55G assembly is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with six (6) rail bolt assemblies.

ROHN's R-GA45GD guy bracket assembly mounts to any standard Rohn 45G tower section along the horizontal bracing members and is used primarily as the main guy strand to tower anchor point in guyed configurations of the Rohn 45G towers. Each hot-dip galvanized guy bracket assembly comes complete with all necessary mounting bolts and integrated guy wire attachment points. The Rohn R-GA45GD can be used along with the Rohn R-TB45D torque bars for additional stability in areas where stable line of site...

Specifications Product Classification Product Type Stiff arm mount General Specifications Mounting Round and angle legs Pipe, quantity 0 Dimensions Height 152.4 mm | 6 in Width 203.2 mm | 8 in Length 203.2 mm | 8 in Pipe Outer Diameter 60.96 mm | 2.4 in Material Specifications Material Type Hot dip galvanized steel Packaging and Weights Included Attachment hardware Packaging quantity 1 Weight, net 6.078 kg | 13.4 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed,...

ROHN's R-RP25G rotor post is designed for use with the Rohn model 25G tower sections and facilitates the mounting of antenna rotors onto its integrated 1 1/4 in post. The rotor post assembly is bolted to the side rail of a standard 25G tower section with the included -bolts and it provides 4 3/4 in of clearance between the side rail and the rotor post. The extension arm of the R-RP25G is welded to the bottom of the rotor post.

ROHN's R-WP25G 25G work platform is engineered specifically for use with Rohn's model 25G towers. The hot-dip galvanized steel grated work platform snaps into place at any level—with no bolts required—along the length of the tower providing anyone working on the tower a sturdy and secure platform upon which to stand or place equipment. Make your Rohn 25G safe work environment complete with the addition of the R-SR245 safety ring (sold separately). The R-WP25G is not a substitute for...

ROHN BPH25G Hinged Tower Concrete Base Plate The ROHN BPH25G is is Bolted to a Concrete Pier Placement. The BPH25G is drilled for use with six (6) 1/2 x 12 inch "J" Bolts or Equivalent Protruding through Pad (Seek Engineering notes in Spec. Sheets, J Bolts Sold Separately), and Allows for the Tower to be Rotated up from Base during Installation. This Rohn Base Plate is 15 inches Square for the ROHN 25G Tower to be Mounted on a new or existing Concrete Pier. This Base for the 25G tower...

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

Rohn KY2068A15 Tower DBS Dish Antenna 1.50 inch Mount The ROHN KY2068A15 Tower DBS Dish Antenna 1.50 inch for Mounting DBS Satellite Dish Antenna on 1.5 inch DIA, 3 foot long Side Arm Assembly of the ROHN 25G Tower. Bolts to 2 Straight Rails of a 25G tower Section. Antenna Support Assembly includes galvanized support brackets, clamps, and mounting pipe. Mounting Pipe Sizes are associated with these part numbers and Descriptions: KY2068A15 - 1.50 inch O.D. x 3 Foot Pipe KY2068A16 - 1.66 inch O.D....

DM25G2 Rohn 25G FACE DISH MOUNT The ROHN R-DM25G2 Tower Face Dish Mount is designed to mount antennas directly to the tower face and bolts to any of the three faces of a ROHN model 25G tower. The kit includes two (2) steel angle cross members and all required mounting hardware. Kit also includes a 2 -in OD x 5-ft galvanized steel mounting pipe.

Rohn HB25CG 25G House Bracket Assy, ADJ 0"" TO 36"" The ROHN R-HB25CG adjustable house mounting bracket for Standoff up to 36 inches. This ROHN 25G Tower HB25CG house bracket offers greater support for Guyed, Bracketed and Self Supporting 25G Tower installations and is adjustable up to 36 inches. Comes with Adjustment Bolts and Rail Clamps. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN 25G catalog.

ROHN BPC45G Plate for Concrete Pier Tower Placement The BPC45G uses a 3/4" x 12" pier pin to align the plate to the slab (Separate Item). This Rohn Base Plate is 24" x 20" Square and 5/16 Thick, allows the ROHN 45G Tower to be Mounted onto an existing or new Concrete Pier, but Cannot be Used as a Self Supporting Base Plate (none exists for the 45G, see R-SB45G). This Tower Base uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness...

Rohn GA25GD 25G Guy Bracket Assembly w/ Hardware The ROHN R-GA25GD guy bracket assembly Mounts to the ROHN 25G Tower at any Horizontal Brace. This Guy Assembly is used to attach guy wires to the ROHN 25G tower, distributing forces to the entire ROHN Tower instead of just one leg. It is recommended as an Attachment to a ROHN Tower Section for use at every guy level. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As...

ROHN’s R-WP45G 45G work platform is engineered specifically for use with Rohn's model 45G towers. The hot-dip galvanized steel grated work platform snaps into place at any level—with no bolts required—along the length of the tower providing anyone working on the tower a sturdy and secure platform upon which to stand or place equipment. Make your Rohn 45G safe work environment complete with the addition of the Rohn R-SR245 safety ring (sold separately). The R-WP45G is not a substitute...

ROHN's R-FR25G flat roof mount is designed to bolt directly to a water-tight and appropriately reinforced flat roof or other similar surface for guyed applications of the Rohn model 25G tower. The R-FR25G is not to be used as a self-supporting base plate. For self-supporting base plate please see the Rohn R-25GSSB. The R-FR25G base plate uses double-bolted joints for connecting directly to a standard Rohn 25G tower section that are proven to be the best method of joining tower sections for sturdiness...

TRYLON's 4.600.1201.001 STG tower base grounding kit is a single-leg grounding kit designed to be used with Trylon STG towers. The kit contains one (1) 5/8 in OD x 8 ft copper-coated steel ground rod, #6 BSC copper grounding wire, one (1) tower grounding clamp to attach the wire to the tower base, and one (1) rod clamp to attach the wire to the grounding rod. This grounding kit does not meet EIA grounding requirements. For STG grounding that is EIA compliant please see the Trylon 4.91.0103.004 two-leg...

Rohn TB45D 45G Torque Bar (Single Bar) The ROHN R-TB45D One Bar per Order. Three Bars would complete 3-way down guy. Modifies a GA45GD into a Torque Stabilizer Assembly that could be installed at existing Guy attachments on any horizontal brace as opposed to tower section joints. This Item will also require the 3/8 inch shackles to complete the upgrade. This Anti-twist device would be located in the area of the Microwave or other Focused Beam antennas to provide resistance to torque. Use only 3/16...

ROHN TA45 Tower Torque Arm Stabilizer Assembly Anti-twist device located in the area of the Microwave or other Focused Beam antennas. Provides six-way guying. Bolts to tower at any section joint and attached with joint bolts. Must be installed as sections are joined together. The 45G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 300 feet. Features: Hot Dip Galvanized Bolt-on...

TRYLON's 4.84.1171.000 antenna pipe mount is designed for use with the Trylon Titan self-supporting tower. It attaches directly to the face of the #8 section (4.95.0081.000) of the Trylon Titan tower and comes complete with two (2) angle frames, two (2) clip angles, two (2) U-bolt assemblies, and one (1) 2 in OD x 6 ft mounting pipe. All mount hardware is hot-dip galvalized for years of worry-free corrosion protection.

Specifications Product Classification Product Type Plain end pipe General Specifications Pipe, quantity 1 Dimensions Height 88.9 mm | 3.5 in Width 88.9 mm | 3.5 in Length 3200.4 mm | 126 in Pipe Length 3200.4 mm | 126 in Pipe Outer Diameter 88.9 mm | 3.5 in Material Specifications Material Type Hot dip galvanized steel Packaging and Weights Included Pipe Packaging quantity 1 Weight, net 56.7 kg | 125.002 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured...

This drawing package includes a custom foundation design analysis based upon customer-supplied geotechnical reports. This foundation drawing provides only excavation details, concrete details, quantity and size of rebar, reactions at the base, overturning moment. It does NOT include seismic analysis, detailed rebar drawings or other non-standard foundation requirements. Contact your local building code authority or permit office before you order the tower to determine if this is required to determine...

The Trylon 5.630.0210.118 SuperTitan MAX 118ft M210 self-supporting tower is the newest addition to the Trylon family of pre-engineered structures. The SuperTitan MAX was designed for applications where the loading and/or height requirements surpass those found within the SuperTitan product line. The 5.630.0210.118 tower kit includes everything you'll need to construct a 118ft self-supporting structure including: All tower hardware Base shoes and anchor bolts for use in a concrete foundation Angle...

TRYLON's 5.94.0071.000 is a standard #7 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0071.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

TRYLON’s 4.98.0100.010 step-bolt climbing kit is designed for use on a single 10 ft SuperTitan tower section. It includes everything you'll need to install the kit. The Trylon climbing step-bolt kits facilitate an easier climb up the tower and are available for all SuperTitan tower heights and models. The 10 in step bolts are leg-mounted and installed in a staggered pattern. For maximum safety, the step-bolts can be used in conjunction with the Cougar safety cable system. All parts of the...

MULTIPLE's NM20050CL liquidtight flexible conduit, nonmetallic, 2 in, gray

TRYLON's 5.94.0051.000 is a standard #5 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0051.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

TRYLON's 5.94.0091.000 is a standard #9 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0091.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

TRYLON's 5.94.0041.000 is a standard #4 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0041.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

ROHN's R-APL25G assembly plate / top beacon plate is designed for use with the Rohn model 25G tower sections. It bolts directly to the top of a standard tower section and can be used for mounting a beacon light or other similar piece of equipment at the top of the tower. Each R-APL25G assembly is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with six (6) rail bolts assemblies.

Specifications Product Classification Product Type Plain end pipe General Specifications Pipe, quantity 1 Dimensions Height 114.3 mm | 4.5 in Width 114.3 mm | 4.5 in Length 1600.2 mm | 63 in Pipe Length 1600.2 mm | 63 in Pipe Outer Diameter 114.3 mm | 4.5 in Material Specifications Material Type Hot dip galvanized steel Packaging and Weights Included Pipe Packaging quantity 1 Weight, net 25.9 kg | 57.1 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured...

SuperTitan[tm] Self-Support TowersTrylon's SuperTitanKD bridges the cost gap between the lighter-weight Titan towers and more costly custom-designed SuperTitanKD is a modular tower that can be built up to 58m (190 feet) high. Consisting of 21 standard sections, each 3m (10 feet) high, this modular system can be configured to create towers of varying heights and loading capacities. The SuperTitan KD design conforms to TIA and CSA standards and can be stamped by a professional SuperTitanKD is supplied...

TRYLON's 5.94.0121.0HD is a heavy-duty #11 section for the SuperTitan tower series. This heavy-duty version of the #12 section features 5/16 in thick legs. It is shipped knocked-down which means that field assembly is required. Each 5.94.0121.0 HD knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-65G90R160 160 ft guyed tower kit contains all hardware necessary to construct a complete 160 ft guyed tower suitable for use in areas with 90 mph Rev G / 70 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: One (1) 10 ft tapered base One (1) 10 ft standard 65G section Seven (7) standard 20 ft 65G tower sections Three...

ROHN TA55 Tower Torque Arm Stabilizer Assembly Anti-twist device located in the area of the Microwave or other Focused Beam antennas. Provides six-way guying. Bolts to tower at any section joint and attached with joint bolts. Must be installed as sections are joined together. The 55G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 400 feet. Features: Hot Dip Galvanized Bolt-on...

ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn R-65G90R170 170 ft guyed tower kit contains all hardware necessary to construct a complete 170 ft guyed tower suitable for use in areas with 90 mph Rev G / 70 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: One (1) 10 ft tapered base Eight (8) standard 20 ft 65G tower sections Three (3) guy bracket assemblies with hardware...

ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn’s R-65G110R170 170 ft guyed tower kit contains all hardware necessary to construct a complete 170 ft guyed tower suitable for use in areas with 110 mph Rev G / 90 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: One (1) 10 ft tapered base Eight (8) standard 20 ft 65G tower sections Three (3) guy bracket assemblies...

ROHN’s complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The Rohn’s R-65G110R160 160 ft guyed tower kit contains all hardware necessary to construct a complete 160 ft guyed tower suitable for use in areas with 110 mph Rev G / 90 mph Rev F wind speeds. See recommended maximum loadings below. The tower kit includes: One (1) 10 ft tapered base One (1) 10 ft standard 65G tower section Seven (7) standard 20 ft 65G tower...

SuperTitan[tm] Self-Support TowersTrylon's SuperTitanKD bridges the cost gap between the lighter-weight Titan towers and more costly custom-designed SuperTitanKD is a modular tower that can be built up to 58m (190 feet) high. Consisting of 21 standard sections, each 3m (10 feet) high, this modular system can be configured to create towers of varying heights and loading capacities. The SuperTitan KD design conforms to TIA and CSA standards and can be stamped by a professional SuperTitanKD is supplied...

ROHN BPL25G Top Bearing Plate for 25G Tower Long legs provide extra clearance for installation of equipment such as Rotors (Accessory Shelf or Equivalent would probably be necessary). Bolts to top of standard ROHN 25G Tower section. Pre-Drilled to accept the ROHN TB3 (2 inch) Thrust bearing. The ROHN 25G Tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN Tower catalog. As a guyed structure, it can rise to a maximum of 190 feet. Features:...

ROHN 25GWM Tower Wall Mount Bracket Kit The ROHN 25GWM allows you to wall mount the base of a bracketed 25G tower. This wall mount gives you the ability to install more load than is typically available on a standard wall mount. The wall mount also helps to keep the ground area around the tower location usable. The R-25GWM assembly comes complete with both top and bottom wall mounting bracket materials and stub leg base plate for connection to a standard ROHN 25G tower section. 1. It is the purchaser’s...

ROHN BPH45G Hinged Tower Base Plate The ROHN BPH45G is Bolted to a Concrete Pier Placement. The BPH45G is drilled for use with Six (6) 5/8 x 12 inch "J" Bolts or Equivalent Protruding through Pad (Seek Engineering notes in Spec. Sheets, J Bolts Sold Separately), and Allows for the Tower to be Rotated up from Base during Installation. This Rohn Base Plate is 24 inches Square for the ROHN 45G Tower to be Mounted on a new or existing Concrete Pier. This Base for the 45G tower can be used...

DM45G2 Rohn 45G FACE DISH MOUNT The ROHN R-DM45G2 Tower Face Dish Mount is designed to mount antennas directly to the tower face and bolts to any of the three faces of a ROHN model 45G tower. The kit includes two (2) steel angle cross members and all required mounting hardware. Kit also includes a 2 -in OD x 5-ft galvanized steel mounting pipe.

Specifications Product Classification Product Type Reinforcement kit General Specifications Mounting Angle 60�, 203.2 mm (8 in) | Angle 90�, 152.4 mm (6 in) | Straight or tapered legs up to 203.2 mm (8 in) OD Pipe, quantity 0 Tower Taper Non-tapered | Tapered Dimensions Face Width 4.42 m | 14.5 ft Length 1524 mm | 60 in Mounting Diameter, maximum 203.2 mm | 8 in Mounting Diameter, minimum 50.8 mm | 2 in Material Specifications Material Type Hot dip galvanized steel Packaging and Weights Included...

Rohn APL4A Top Plate Beacon Mount Top Plate and Beacon Mount for 45GSR and 4N Tower Sections.

TRYLON's 5.94.0031.000 is a standard #3 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0031.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

ROHN's R-BAS25G bearing and accessory shelf is designed as a complete unit with top and bottom plate and integrated tubular legs. Rohn has designed the assembly to be compatible with its line of 25G standard tower sections and it is meant to me installed as the topmost section of the tower. The R-BAS25G is drilled to accept a thrust bearing (see the ROHN R-TB3 and R-TB4) on the top plate for use with an extended mast and the accessory shelf comes pre-drilled making it compatible with many of today's...

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

TRYLON's 5.94.0021.000 is a standard #2 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0021.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

TRYLON's 5.94.0061.000 is a standard #6 section for the SuperTitan tower series. It is shipped knocked-down which means that field assembly is required. Each 5.94.0061.000 knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware, and splice plates to facilitate connection to an adjoining SuperTitan tower section.

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

ROHN's R-AS25G single accessory shelf is designed to bolt to all three side rails of any standard Rohn model 25G tower section to accommodate the mounting of beacon lights, antenna rotors, and similar top-mounted attachments anywhere along the section length or at the section top. It comes complete with three (3) U bolts and is pre-drilled to accommodate many of today's most popular antenna rotors. Field drilling may be necessary for your particular model.

Rohn GA65GD 65G Guy Bracket Assembly w/ Hardware The ROHN R-GA65GD guy bracket assembly Mounts to the ROHN 65G Tower at any Horizontal Brace. This Guy Assembly is used to attach guy wires to the ROHN 65G tower. It is recommended as an Attachment to a ROHN Tower Section for use at every guy level. The 65G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 500 feet.

Specifications Product Classification Product Type Reinforcement kit General Specifications Mounting Angle 60�, 203.2 mm (8 in) | Angle 90�, 152.4 mm (6 in) | Straight or tapered legs up to 203.2 mm (8 in) OD Pipe, quantity 0 Tower Taper Non-tapered | Tapered Dimensions Height 965.2 mm | 38 in Length 1320.8 mm | 52 in Mounting Diameter, maximum 203.2 mm | 8 in Mounting Diameter, minimum 50.8 mm | 2 in Material Specifications Material Type Hot dip galvanized steel Packaging and Weights Included Clamps...

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

The Trylon 5.94.0102.0HD is a heavy-duty version of the #10 top section for the SuperTITAN tower series. Because it's heavy-duty it features 5/16' thick legs for added support. It is shipped knocked-down which means that field assembly is required and it is designed for use as the top section of a complete SuperTITAN tower. Each 5.94.0102.0HD knocked-down top section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection...

ROHN TA25 Tower Torque Arm Stabilizer Assembly Anti-twist device located in the area of the Microwave or other Focused Beam antennas to provide six-way guying. Bolts to tower at any section joint and attached with joint bolts. Must be installed as sections are joined together. The 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 190 feet. Features: Torque Arm Stabilizer Assembly...

G-SERIES SELF-SUPPORTING TOWERSThe self-supporting G-Series towers o-ffer an easy, low-cost solution to get light weight antennas in the air quickly. By using the G-Series tower as a self-supporting structure, you minimize land area usage. They are functional in a wide variety of wind speeds. See ROHN's standard designs to help identify the right structure for your project. These are the same sturdy, robust tower sections that ROHN has fabricated for years. Each larger model allows for more loading...

SuperTitan[tm] Self-Support TowersTrylon's SuperTitanKD bridges the cost gap between the lighter-weight Titan towers and more costly custom-designed SuperTitanKD is a modular tower that can be built up to 58m (190 feet) high. Consisting of 21 standard sections, each 3m (10 feet) high, this modular system can be configured to create towers of varying heights and loading capacities. The SuperTitan KD design conforms to TIA and CSA standards and can be stamped by a professional SuperTitanKD is supplied...

Rohn HB25AG 25G House Bracket Assembly, ADJ 0"" TO 15"" ROHN HB25AG 15 inch Adjustable House Bracket for Standoff up to 15 inches. This ROHN Tower HB25AG wall bracket offers greater support for Guyed and Bracketed ROHN 25G Tower installations and is adjustable up to 15 inches. Comes with Adjustment Bolts and Rail Clamps. The ROHN 25G tower can be used in guyed, self-supporting or bracketed configurations according to specifications in the ROHN Tower catalog.

SuperTitan[tm] Self-Support TowersTrylon's SuperTitanKD bridges the cost gap between the lighter-weight Titan towers and more costly custom-designed SuperTitanKD is a modular tower that can be built up to 58m (190 feet) high. Consisting of 21 standard sections, each 3m (10 feet) high, this modular system can be configured to create towers of varying heights and loading capacities. The SuperTitan KD design conforms to TIA and CSA standards and can be stamped by a professional SuperTitanKD is supplied...