Toll Free
The Trylon TSF 5.94.0300.020 SuperTITAN self-supporting tower kit comes complete with all of the hardware you'll need to construct a 20-ft self-supporting tower. The Trylon SuperTITAN is compliant with both EIA 222-F and EIA 222-G design standards and is constructed of standard 10-ft sections. Each section is comprised of 100% hot-dip galvanized 60° angle and 90° bracing on a diagonal pattern. The 5.94.0300.020 SuperTITAN tower ships knocked-down and requires field assembly by an experienced...
The Trylon 5.94.0121.0HD is a heavy-duty #11 section for the SuperTITAN tower series. This heavy-duty version of the #12 section features 5/16" thick legs. It is shipped knocked-down which means that field assembly is required. Each 5.94.0121.0HD knocked-down section is completely hot-dip galvanized for years of worry-free corrosion protection and comes complete with all section members, connection hardware and splice plates to facilitate connection to an adjoining SuperTITAN tower section.
The Trylon TSF 5.94.0500.020 SuperTITAN self-supporting tower kit comes complete with all of the hardware you'll need to construct a 20-ft self-supporting tower. The Trylon SuperTITAN is compliant with both EIA 222-F and EIA 222-G design standards and is constructed of standard 10-ft sections. Each section is comprised of 100% hot-dip galvanized 60° angle and 90° bracing on a diagonal pattern. The 5.94.0500.020 SuperTITAN tower ships knocked-down and requires field assembly by an experienced...
The ROHN R-25GBRM is a non-penetrating roof mount designed to support ROHN model 25G tower sections. The mount is able to support two (2) sections of 25G tower in a self-supporting application. The base of the mount covers 10-ft² and is equipped with a 16-in tray designed for the concrete blocks typically used as ballast. Use of a rubberized support mat is recommended underneath the roof mount.
The Trylon 4.95.0304.000 T300 TITAN 40-ft self-supporting tower is ideal for lightweight, commercial duty tower applications like those found in internet service and SCADA networks. The TITAN model 4.95.0304.000 tower is survival-rated only and does not meet EIA design standards. The tower sections are built-to-order from 100% hot-dip galvanized all-angle components by and will ship in a nested configuration to your job site, ready to assemble. The 4.95.0304.000 40-ft tower kit includes all of the...
This drawing package includes a custom foundation design analysis based upon customer-supplied geotechnical reports. This foundation drawing provides only excavation details, concrete details, quantity and size of rebar, reactions at the base, overturning moment. It does NOT include seismic analysis, detailed rebar drawings or other non-standard foundation requirements. Contact your local building code authority or permit office before you order the tower to determine if this is required to determine...
The Trylon 4.618. STG Freestanding Tower Kit uses the same standard sections found in the guyed and bracketed versions of the Trylon STG. This Freestanding model STG kit comes complete with all necessary hardware to construct a 30-ft freestanding tower. The kit includes: 10-ft Standard tower sections with splice hardware 5-ft Short base section (for direct embedment) Tower base grounding kit Tower warning signage Allowable antenna areas are based on (1) ½-in and (1) ⅞-in transmission...
PA32GFRXHF3PS 136-174 MHz, 30-60W POWER INPUT, 150-250W POWER OUTPUT, BASE STATION, RF AMP NS Non-Cancel Non-Return Item This listing is for Each.
Rohn DEP40MA Direct Embed Pole Medium 40' The ROHN DEP40MA 40-ft medium duty direct embed monopole is available exclusively from TESSCO. ROHN pre-engineered monopoles offer the perfect balance between durability and convenience. The DEP40MA is designed to be installed in hours as opposed to days. SImply excavate a hole, insert the pole base into the ground and backfill with the appropriate aggregate. The ROHN DEP40MA direct-embed monopole kit comes complete with everything you need to erect a 40-ft...
The ROHN complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The ROHN R-65G110R160 160-ft guyed tower kit contains all hardware necessary to construct a complete 160-ft guyed tower suitable for use in areas with 110mph Rev. G/90mph Rev. F wind speeds. See recommended maximum loadings below. The tower kit includes: (1) 10-ft Tapered base (1) 10-ft Standard 65G tower section (7) Standard 20-ft 65G tower sections (3) Guy bracket assemblies...
The ROHN complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The ROHN R-65G90R160 160-ft guyed tower kit contains all hardware necessary to construct a complete 160-ft guyed tower suitable for use in areas with 90mph Rev. G/70mph Rev. F wind speeds. See recommended maximum loadings below. The tower kit includes: (1) 10-ft Tapered base (1) 10-ft Standard 65G section (7) Standard 20-ft 65G tower sections (3) Guy bracket assemblies...
The ROHN complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The ROHN R-65G90R170 170-ft guyed tower kit contains all hardware necessary to construct a complete 170-ft guyed tower suitable for use in areas with 90mph Rev. G/70mph Rev. F wind speeds. See recommended maximum loadings below. The tower kit includes: (1) 10-ft Tapered base (8) Standard 20-ft 65G tower sections (3) Guy bracket assemblies with hardware (1) Leg mounted...
The ROHN complete guyed tower kits make it easier than ever for you to get everything you need for your next tower installation. The ROHN R-65G110R170 170-ft guyed tower kit contains all hardware necessary to construct a complete 170-ft guyed tower suitable for use in areas with 110mph Rev. G/90mph Rev. F wind speeds. See recommended maximum loadings below. The tower kit includes: (1) 10-ft Tapered base (8) Standard 20-ft 65G tower sections (3) Guy bracket assemblies with hardware (1) Leg mounted...
The Trylon 4.618. STG Guyed Tower Kit comes complete with all of the hardware you need to construct a 250-ft guyed tower. All components are hot-dip galvanized for years of worry-free corrosion protection in even the harshest environments. Included with your complete 4.618. STG Guyed Tower Kit: (1) Site warning package (12) Guy wire ground clips (3) Guy anchors (25) STG 10-ft standard section assemblies (1) Star base kit (4) Guy bracket kits (6) ¼-in EHS guy hardware kits (6) 5/16-in EHS...
DIRECT EMBED POLESROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today's dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles off-er extremely efficient * Completely hot-dip galvanized after fabrication* Fast, easy installation* Designed for applications with stringent deflection requirements* Internal...
DIRECT EMBED POLESROHN Direct Embed Poles minimize site requirements, lowering lease rates and acquisition costs. They are designed for rapid installation, meeting the demands of today's dynamic communication environments. Whether you are supporting broadband, PCS, security or other lightweight systems, ROHN Tapered Steel Poles off-er extremely efficient * Completely hot-dip galvanized after fabrication* Fast, easy installation* Designed for applications with stringent deflection requirements* Internal...
