Hand & Power Tools for Industrial Use

The Havis ChargeGuard Select CG.X automatic on and off timer switch acts as a vehicle power management system by automatically turning on mobile equipment when starting the motor. The 12 V negative ground ignition sensing timer switch is designed for two-way radios, mobile data terminals, laptop computers, and other mobile computing devices. The ChargeGuard delay timer switch has a selectable timeout delay. When turning the motor off, equipment can stay on from 5 sec to infinity depending on what...

EV Series Pro Level 2 Electric Vehicle Charging Station, 80A, 208/240 VAC, 19.2kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, HARDWIRED ONLY, Features AmpUp Charging Station Management Software and LCD Screen Also known as: 078477000557, EV80S This listing is for Each.

Gamber-johnson fork lift mount- dual clam shellw/3 arm and small back plate, for

8oz., Insta Cure|TM| plus Instant Cure Glue | Cyanoacrylate Adhesive A higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.

The RAM-HOL-TAB23-CUPSU includes (2 qty) Tab-Tite™ cup ends and hardware. The interchangeable support cups can be used, along with all RAM Tab-Tite™ and Tab-Lock™ mounts; these include the universal backplate that support all TAB cups. Hardware is included to attach the cup ends to the backplate.The Tab-Tite™ cradle end cups are compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet in the case when determining...

Evr-Green Level 2 Electric Vehicle Charging Station, 32 A, 208/240 VAC, 7.6kW Output, J1772 Charge Connector, Replacement for EVR30-B1C and EVR30-R2C, Includes Mounting Bracket and Pre-Attached Input Cable EV Series Level 2 Electric Vehicle Charging Station, 32 A, 208/240 VAC, 7.6kW Output, J1772 Charge Connector, 18' Cord, Replacement for EVR30-B1C and EVR30-R2C, Includes Mounting Bracket and Pre-Attached Input Cable, Hardwired This listing is for Each.

Evr-Green Level 2 Electric Vehicle Charging Station, 48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, Replacement for EVR40-B2C, Includes Mounting Bracket and Pre-Attached Input Cable EV Series Level 2 Electric Vehicle Charging Station, 48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, 18' Cord, Replacement for EVR40-B2C, Includes Mounting Bracket and Pre-Attached Input Cable, Hardwired This listing is for Each.

EV Series Level 2 Electric Vehicle Charging Station, 32A, 208/240 VAC, 7.6kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, Optional RFID Control, Wi-Fi Compatible (Wi-Fi Function 802.11 b/g/n), Replacement for EVR30-B1C and EVR30-R2C Also known as: 078477877586, EV32W This listing is for Each.

Wl vehicle bus adap wva wifi telematics version

Gamber-johnson 6in articulating arm w/ clevis 90degree tilt 360deg

Gamber-johnson vehicle docking station for the panasonic fz-g1 tablet computer.Dual rf, keyed alike lock.Vesa 75 mount pattern.(ports: (2) usb 3.0, serial, vga, ethernet, hdmi, power in.

Provides safe and secure mounting of equipment in utility vehicle cargo areas Mounts in cargo area behind rear seat or against partition/K9 transport Universal mounting design: bolts to any flat surface (drilling may be required) Hinge down door allows easy access to equipment Equipment protected when in closed position Equipment mounts to removable inner door panel for bench top pre-assembly Includes two lockable cam latches with keys Includes two upper and two lower vents Includes mount and vent...

EV Series Pro Level 2 Electric Vehicle Charging Station, 48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, HARDWIRED ONLY, Features AmpUp Charging Station Management Software and LCD Screen Also known as: 078477877609, EV48S This listing is for Each.

HAVIS Vehicle-Specific 19in Console with Internal Printer Mount for 2021 Dodge Durango Police

Dual Mount Charging Station Pedestal, Front/Back, For Use Only With Evr-Green EV320 and EV480 Level 2 Electric Vehicle Charging Stations. Front/Back Mounting. Mounting Hardware Included Also known as: 078477877623, EPED2 This listing is for Each.

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing AnalysisSpecifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

Direct-Bury Mounting Foundation for all Level 2 EV Charging Pedestals. For Use With EPED1, EPED2, EPCM1-OF3, EPCM2-OF3, and EPCM3-OF3. This listing is for Each.

Single Mount Charging Station Pedestal, For Use Only With Evr-Green EV320 and EV480 Level 2 Electric Vehicle Charging Stations. Mounting Hardware Included Also known as: 078477877616, EPED1 This listing is for Each.

EV Series Pro Level 2 Electric Vehicle Charging Station, 48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, HARDWIRED ONLY, Features AmpUp Charging Station Management Software Also known as: 078477000533, EV48G This listing is for Each.

EV Series Smart Home Level 2 Electric Vehicle Charging Station, 40A, 208/240 VAC, 9.6kW Output, J1772 Charge Connector, 25' Cord, Includes Mounting Bracket and Pre-attached 3ft long input cable with NEMA 14-50P Plug, Optional RFID Control, Wi-Fi Compatible (Wi-Fi Function 802.11 b/g/n) This listing is for Each.

Construction Digging Bar 17lbs.

50-Gallon Heavy Duty Rolling Case 37'' x 23'' x 23''

Adjustable Crescent Wrench 24''

EV Series Standard Level 2 Electric Vehicle Charging Station, 80 A, 208/240 VAC, 19.2kW Output, J1772 Charge Connector, 18' Cord, Station comes with 2 RFID Cards and 1 Admin Card, Includes Mounting Bracket and Pre-Attached Input Cable, HARDWIRED ONLY Also known as: 078477334089, EV800 This listing is for Each.

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing Analysis. Specifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing Analysis. Specifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing Analysis. Specifications:For use by Fire, Rescue and EMS Personnel in an USAR : Black1 lbs. Carries 18 pieces of cribbing. Reinforced...

Bolt Cutters Industrial 36''

Firefighter's Pickhead Axe 6lbs.

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing AnalysisSpecifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing Analysis. Specifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

Sledge Hammer 8lbs.

48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, Includes Mounting Bracket and Pre-Attached Input Cable, Wi-Fi Compatible for Networking with External Providers (Wi-Fi Function 802.11 b/g/n) EV Series Level 2 Electric Vehicle Charging Station, 48A, 208/240 VAC, 11.6kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, Optional RFID Control, Wi-Fi Compatible (Wi-Fi Function 802.11 b/g/n), Replacem This listing is for Each.

For years, rescue personnel have used wood to crib, block or stabilize equipment, products or vehicles. Most of the cribbing used is wood, however wood comes with knots, impurities and are absorbent and are easily cracked, split or cribbing has no knots and does not split, crack or splinter. It does not absorb blood, oil or most chemicals and is slip- vs. Wood Cribbing AnalysisSpecifications:For use by Fire, Rescue and EMS Personnel in an USAR the safety for victims and rescue workers Crib chocks,...

Trash Bags 45-Gallon 120-Pack

Firefighters Hatchet 2lbs.

Ram security knob kit dbl swing arm gimb

EV Series Level 2 Electric Vehicle Charging Station, 80A, 208/240 VAC, 19.2kW Output, J1772 Charge Connector, 18' Cord, Includes Mounting Bracket and Pre-Attached Input Cable, Optional RFID Control, Wi-Fi Compatible (Wi-Fi Function 802.11 b/g/n) Also known as: 078477334096, EV80W This listing is for Each.

This plastic cable clamp for GDS® mUSB and USB Type-C cables secures the connection between the GDS® vehicle dock's pigtail connector and the GDS® charger. Four small zip ties can be attached around the connection to ensure cables cannot be unplugged. Additionally, two long zip ties are included with the clamp for mounting to the back of a GDS® Dock™ or the RAM® Tele-Pole™ for vehicle bases. These long zip ties allow for attachment on rails up to 1.5" in diameter.

This GDS® module makes any Samsung S9, S10, or S10e with the OtterBox uniVERSE case GDS® Compatible™. Attaching directly into your device's charging port, the module allows you to easily charge, dock, and sync with GDS® Technology™ - all with the protection of your uniVERSE case. With the GDS® module, enable your device for use with USB Type-C GDS® Charge™ products and GDS® Docks™ (compatible with Samsung DeX mode) while preventing damage from repetitive...

This GDS® Docking Cup attaches to the base of GDS® locking and non-locking vehicle docks, accommodating USB Type-C devices, Samsung DeX mode, 2K HDMI, and USB 3.1. When paired with the proper top cup, this docking cup can be used to upgrade your existing RAM® Tab-Tite™ or RAM® Tab-Lock™ holder.The integrated GDS® Technology™ platform enables data and charging capabilities to the mounted tablet. Without the need to the remove the IntelliSkin™ sleeve from...

Crafted from diecast aluminum with a black coat finish, the RAM 12 Volt Lighter Receptacle Faceplate is a must have accessory for any Tough-Box™ Console System. The faceplate is compact and lightweight, taking up minimal space in your console, yet offering the utmost in versatility. The rubber caps, along with the innovative tongue and groove feature keeps the inside of the console free of contaminates as well as provides a rock solid system once installed into the RAM Tough-Box™ Console....

The RAM Handi-Case™ is capable of doing so many tasks it will astound you. When a brief case it too much but a notepad, is not enough, the Handi-Case™ is exactly what you need. Beyond just a writing surface, you get document storage, tool holder, pen and pencil storage, and of course, RAM's rugged construction. No matter where the job takes you, the RAM Handi-Case™ is ready to multi task. For any professional on the go this is the tool to keep you organized at home, at the office,...

Unpkd replacement sym1 pcb set

The RAM Handi-Case™ is capable of doing so many tasks it will astound you. When a brief case it too much but a note pad, is not enough, the Handi-Case™ is exactly what you need. Beyond just a writing surface, you get document storage, mouse pad, tool holder, pen and pencil storage, and of course, RAM's rugged construction. No matter where the job takes you, the RAM Handi-Case™ is ready to multi task. For any professional on the go this is the tool to keep you organized at home,...

Ram security knob kit sng swing arm gimb

Sometimes, it's all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM® X-Grip® has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone cradle evolved. Compatible and interchangeable with a wide range of popular RAM Mounting...

Obd-ii adapter kit for ibr1700 (includes one obd-ii adapter and one 15 foot male/male null modem db9 serial cable)

Havis top mount flip up armrest height adjustable

Ram security nut with stud for gimbal

Black Electrical Tape, per roll 3/4-inch x 60 ft.Vinyl economy gradeFor splicing and insulating wires

The Havis C-SW-2 black paddle type rocker switch has 20 A, 18 V. The rocker switch features a red pilot light and a on and off 4 prong. It fits a panel cutout size of 0.843 in wide x 1.456 in high.

Havis rugged kb w/ inegrated touchpad mount system lite

Havis 24 vehicle specific console 2011-2012 dodge charger

With the RAM® Tough-Track™, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. The black anodized aluminum version of the RAM® Tough-Track™ can be drilled to any flat surface and is designed for use with #8 screws for easy installation - hardware not included. Made to be a dependable and rugged mounting solution, the anodized aluminum provides a smooth slide across the track and anti-corrosion protection. The...

Gamber-johnson notepad v screen support for rugged computers, for all toughbook

2020 ford interceptor utility specific high flat console

Exterior brother printer armrest for all toughbook

Ford utility console box no cup holder or arm rest for all cf-18/19

Kit dodge charger console box

Lind 80 Watt Isolated DC Adapter for Forklifts with 20-60 VDC Input hardwired installations (bare wire)

Gamber-johnson vehicle docking station for the panasonic fz-g1 and fz-g2 tablet

Lind 60 watt isolated dc/dc adapter for pdrc hardwired installations (bare wire)

Havis 6 accessory pocket to mount inside of havis consoles