DC voltage/current, thermocouple, frequency, and RTD input models The Ultra SlimPak II line of conditioners has greater input, output accuracy, and stability than most signal conditioners on the market today. These signal conditioners are stand-alone signal conditioners that do not need the Ethernet connection in order to be configured and maintained. They are configured via DIP switches and push-button calibration. If the need for web access arrives, simply mount the Communications Interface next...
General Purpose Relay, 120V AC Coil, DPDT, Contact Rating: 10 Amp. Terminal Style: 8-Pin, Octal Plug-In. Maximum Switching Voltage: 300V. Full Featured: Locking Pushbutton, LED, Test Button, Removable ID Tag, Flag Indicator, Finger-Grip Cover. D series Ice Cube, enclosed power and open power general purpose relays are cost effective, provide excellent functionality and are ideal for any application from controlling smaller loads, to those requiring high current-carrying capacity. Assembly and installation...
Beacon, LED, Indicator, Multicolor, 5-Pin Quick-Disconnect, 240 VAC, IP66/NEMA 4X, 92.8 x 5.3 "This listing is for Each.
Warning Light, Blinking/Continuous/Flashing, Blue, 24 VDC, 6 WThis listing is for Each.
Warning Light, Blinking/Continuous/Flashing, Red, 24 VDC, 3.6 WThis listing is for Each.
Beacon, LED, Daylight Visible, Blue, Green, Red, Flashing, Rotating, 48 VDC, IP66, 92.8 x 5.3 "This listing is for Each.
Beacon, LED, Daylight Visible, Green, Red, Yellow, Flashing, 48 VDC, IP66, 3.65 ", 5.3 "This listing is for Each.
Beacon, LED, Indicator, Multicolor, 5-Pin M12, 48 VDC, IP66/NEMA 4X, 92.8 x 5.3 "This listing is for Each.
Warning Light, Blinking/Continuous/Flashing, Blue, 24 VDC, 14.4 WThis listing is for Each.
Warning Light, Blinking/Continuous/Flashing, Green, 24 VDC, 7.2 W This listing is for Each.
Warning Light, Blinking/Continuous/Flashing, Amber, 24 VDC, 3.6 WThis listing is for Each.
FLASHING LIGHT W/XENON TUBE, BLUE, 115VThis listing is for Each.
These drivers connect to a controller and a stepper motor. The driver converts the programmed movements from the controller into electrical signals and sends them to the stepper motor to perform the actions.
FLASHING LIGHT W/XENON TUBE, BLUE, 24VThis listing is for Each.
Allows free and easy movement of conduit. W/o rotary flange This listing is for each.
FLASHING LIGHT W/XENON TUBE, GREEN, 115VThis listing is for Each.
FLASHING LIGHT W/XENON TUBE, RED, 115VThis listing is for Each.
1 year warranty ... These UL listed Current Sensing Relays are designed to monitor current levels in AC conductors, and provide a dry relay contact activation when the current rises above or falls below a user adjusted set point. The CR4395 series is for general applications, and the CR7310 series is for ground fault measurement and the CR5395 series, Direct Current Sensing relay provides a precision and cost effective method for monitoring DC current. FEATURESVariable trip point and time delay...
Autonics A4K-M245 2 Phase Stepper, 42mm Square, Single shaft, 1.2A / phase, 0.348 N.m Holding torque
Autonics A3K-S545 Motor, 5 Phase Stepping, 42mm Square, Shaft Type, 0.75A/Phase, 2.4 kgf-cm Torque
These drivers connect to a controller and a stepper motor. The driver converts the programmed movements from the controller into electrical signals and sends them to the stepper motor to perform the actions.
FLASHING LIGHT W/XENON TUBE, RED, 24VThis listing is for Each.
This Harmony XVB illuminated unit is supplied with 24V AC/DC and has a clear LED with a steady light. This clear indicating bank lens is designed as an illuminated unit to be connected with base and create complete tower light. Its integral LED offers a steady light, allowing it to clearly display the status of your machines in applications such as automotive, machine tool, material handling, packaging, assembly stations, conveyors. It is impact resistant, dust resistant, water resistant and vibration...
Altech S-FH1-36 Flange Handle Kit, 36" Cable, For TD125, TD/TS Series
Altech S-FH3-60 Flange Handle Kit, 60" Cable, For TS400, TD/TS Series
Can be installed in all frame types. Reset Hold Voltage = 0.85 x Vn. Drop-Out Voltage = 0.35 - 0.7 x Vn. Frequency (only AC): 45Hz - 65Hz
Monitor a range of alarm conditions Thumbwheel switch adjustments ... -- Thumbwheel switch adjustments -- Only 1.2 inch (29.5mm) wide This listing is for Each.
FLASHING LIGHT W/XENON TUBE, RED, 230VThis listing is for Each.
TD/TS Series High Interrupting Capacity (HU)
TD/TS Series Normal Interrupting Capacity (NU)
Can be installed in all frame types. Range of operational voltage: 0.7 - 1.1 x Vn. Frequency (only AC): 45Hz - 65Hz
Can be installed in all frame types. Range of operational voltage: 0.7 - 1.1 x Vn. Frequency (only AC): 45Hz - 65Hz
Altech S-MIT13 Mechanical Interlocking Device, For TD125, TD/TS Series
FLASHING LIGHT W/XENON TUBE, YEL, 230VThis listing is for Each.
Autonics ARD-DX16P Remote I/O Device Net, DC PNP input I/O each 8 points, Control input 10 -28VDC, 10mA / contact, Control output 0.5A/point, Power 12 - 28VDC
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series High Interrupting Capacity (HU)
Altech S-EHU4-12 Extended Rotary Handle Kit, Shaft 12", For TS800, TD/TS Series
Altech S-FH4-72 Flange Handle Kit, 72" Cable, For TS800, TD/TS Series
Can be installed in all frame types. Range of operational voltage: 0.7 - 1.1 x Vn. Frequency (only AC): 45Hz - 65Hz
These drivers connect to a controller and a stepper motor. The driver converts the programmed movements from the controller into electrical signals and sends them to the stepper motor to perform the actions.
FLASHING LIGHT W/XENON TUBE, CLEAR, 24V This listing is for Each.
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series High Interrupting Capacity (HU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)
Altech S-EHU2-12/NEMA 4X Extended Rotary Handle Kit, Shaft 12", For TD125, TD/TS Series
Altech S-FH2-48 Flange Handle Kit, 48" Cable, For TS250, TD/TS Series
Status Indicator, Continuous, Green/Red, NPN, 10 VDC to 30 VDCThis listing is for Each.
FLASHING LIGHT W/XENON TUBE, GREEN, 24VThis listing is for Each.
Autonics AiC-60LA Controller-Intergrated Type 2-Phase Closed-Loop Motor Stepper Motor System, AIC-D-60LA Driver + AIS-M-60LA Motor
Autonics DPU34B-120N Digital Power Controller, 3-phase, LED Display, 440VAC/120A, Phase control, ON/OFF control, Cycle control, Alarm(2a)
Autonics MD2U-ID20 Driver, 2 Phase Stepper, 0.5-2.0A/Phase, 20 - 35VDC, 3A, Unipolar, Intelligent
TD/TS Series High Interrupting Capacity (HU)
TD/TS Series Normal Interrupting Capacity (NU)
TD/TS Series Normal Interrupting Capacity (NU)