Mitutoyo Disk Micrometer, Imperial, Series: 123, 0 to 1 in, +/-0.0002 in Accuracy, Graduations: 0.001 in, Rotating Spindle, 6.35 mm Spindle Dia, Ratchet Stop Thimble • 0.787 in/20 mm disk diameter • 0.7 mm/0.028 in THK edge to enter narrow recesses • With ratchet stop for constant force • Supplied in fitted plastic case
472 SCREW PITCH GAGE 51Country of Origin: UNITED STATESThis listing is for Each.
Mitutoyo Digimatic Height Gauge, Inch/Metric Standard, Series: 192, 0 to 40 in, 0 to 1000 mm Measuring, +/-0.003 in Accuracy, 0.0005 in, 0.0002 in/0.01 mm, 0.005 mm Resolution, 250 mm Base Length, 7-Digit 11 mm LCD Display, 938882 SR44 Battery Power Source, Stainless Steel, 250 mm L x 150 mm W x 1228 mm H Dimensions • Easy to use • Double column structure ensures high measuring accuracy • Coarse/fine feed switching • Switchable resolution • Two preset reference heights •...
Series 543 – ABSOLUTE Digimatic Indicator ID-C – Standard Type ANSI/AGD Type FEATURES: Large, easy-to-read LCD. Go/no-go judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NG) can be displayed in full-size characters. The positive/negative count resulting from the spindle’s up/down movement can be toggled. Internal calculations using the simple formula of [F(x) = Ax)] are available. Employing the ABSOLUTE linear encoder, the ID-C always...
Mitutoyo Dial Height Gauge, Series: 192, 0 to 40 in, +/-0.003 in Accuracy, Graduations: 0.001 in, 250 mm Base Length, 250 mm L x 150 mm W x 1220 mm H • Easy and error free reading with both up and down digital counters as well as a dial • Provided with a feed wheel for easy coarse feeding • The counters and dial can be re zeroed at any scriber position • Comfortable grip base • Easy and secure clamping
Mitutoyo Micrometer Set, 3-Point Internal Imperial/Metric, Series: 468 Digimatic Holtests, 2 to 2.5 in, 2.5 to 3 in, 3 to 3.5 in, 3.5 to 4 in Individual Range • Tin coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole (up to 100 mm/4 in models) • Large LCD readout • Presetting, zero/ABS, power on/off data hold, data out put, error alarm, battery replacement alarm functions • With ratchet stop...
Mitutoyo Screw Thread Micrometer, Imperial, Series: 126, 3 to 4 in Measuring, +/-0.00025 in Accuracy, Graduations: 0.001 in, 0.00005 in Resolution, 60 deg/55 deg V-Anvil/Interchangeable Anvil, Conical Spindle, 6.35 mm Spindle Diameter, Ratchet Stop Thimble, SR44 Battery Power Source, High Grade Steel Anvil, 115.6 mm L Dimensions • 60 deg or 55 deg V-anvil and conical spindle (interchangeable) are optional, which are made of high grade steel, hardened and precision ground • With ratchet...
Series 117 – Uni-Mike with Interchangeable Anvil Type FEATURES: Accuracy: .0002" Positive locking clamp. Carbide-tipped spindle face. Measures hard-to-reach locations. Measures from a hole or slot to an edge. Measures tube thickness, shoulder-edge distance, rivet head height, etc. With interchangeable anvils (flat anvil, rod anvil, v-anvil). Friction thimble for exact and repetitive readings. MITUTOYO 1-2IN. .0001 UNI-MIKE
Mitutoyo Gauge Block Set, 81-Piece Imperial, Series: 516, Rectangle Shape, ASME 00 Grade, Steel • Precision gauge blocks are the primary standards vital to dimensional quality control in the manufacture of parts • Provided with inspection certificate • These higher accuracy gauges are intended for use within a controlled environment by skilled inspection staff • Mainly used as reference standards for setting high-precision measuring equipment and for the calibration of lower...
Series 543 – ABSOLUTE Digimatic Indicators ID-F Series-with Back-Lit LCD Screen FEATURES: With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on. GO/±NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance. An analog bar indicator has been integrated...
Mitutoyo Holtest Internal Micrometer, 3-Point Imperial Self-Centering, Series: 368, 1.2 to 1.6 in, +/-0.00015 in Accuracy, Graduations: 0.0002 in, 0.0002 in Resolution • These holtests are versatile, self-centering three point internal micrometers for the accurate and efficient direct measurement of internal diameters • Three anvils, evenly spaced at 120 deg apart, contact the internal wall surfaces and find true alignment with the axis of the bore for accurate ID measurement • Highly...
NO. 799 SERIES- ELECTRONIC CALIPER 0-24"Country of Origin: PEOPLE'S REPUBLIC OF CHINANOTE: This item is classified as hazmat. Additional fees apply for shipping hazmat items.WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.This listing is for Each.
73B-8 8" INSIDE CALIPERCountry of Origin: UNITED STATESNOTE: This is a special-order item; as such it is not returnable for any reason. Manufacturer warranties apply and cover the purchase in case of defect. Warranties are fulfilled directly by the manufacturer.This listing is for Box of 3.
823FZ 1-1/2-32" TUBULARCountry of Origin: UNITED STATESThis listing is for Set.
360° protractor and inclinometerAccuracy +/-0.1 Degrees/LevelRepeatability +/-0.1 DegreesLCD display with resolution of 0.1° up to A?10°Low battery indicator with automatic shutoffSupplied in plastic caseDisplays a fast and very accurate electronic digital indication of level (horizontal); vertical (plumb); and every angle in between horizontal and verticalIt's lightweight, with a tough aluminum base providing a smooth, rigid, and very precise measuring platformWith the advanced sensor...
STAINLESS STEEL PROTRACTORS RECTANGULAR OR HALF ROUND Convenient Quick-Reading combination protractor and 6" scaled rule.Easily used by all professionals and tradesmen for measuring angles; setting bevels; transferring angles; etc... A must for all tool chests.Rectangle head with four straight working edges. Bottom straight edge is conveniently ruled 0-1" x 1/16ths.Round top head for non-straight or non-perpendicular surfaces and edges. Bottom straight edge is conveniently ruled 0-1"...
STAINLESS STEEL PROTRACTORS RECTANGULAR OR HALF ROUND Convenient Quick-Reading combination protractor and 6" scaled rule.Easily used by all professionals and tradesmen for measuring angles; setting bevels; transferring angles; etc... A must for all tool chests.Rectangle head with four straight working edges. Bottom straight edge is conveniently ruled 0-1"x 1/16ths.Round top head for non-straight or non-perpendicular surfaces and edges. Bottom straight edge is conveniently ruled 0-1"...
© 2002-2025 Neobits Inc. All rights reserved.
© 2002-2025 Neobits Inc. All rights reserved.