Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Tool Type Flare tool Dimensions Waveguide Size WR112 | WG15 | R84 Material Specifications Material Type Steel Packaging and Weights Height, packed 2.7 cm | 1.063 in Width, packed 2 cm | 0.787 in Length, packed 1 cm | 0.394 in Packaging quantity 1 Weight, gross 2.4 kg | 5.291 lb Regulatory Compliance/Certifications...
RF Industries stocks a wide variety of hand tools and kits for RF coax cable prep and connector installation. From high-quality cable cutters, crimpers and cable strippers to handheld cable testers, we stock all the necessary tools for field installation This listing is for Each.
Beautiful dish for powder This item is made and stocked in Santa Barbara, CA. This item available now on eBay! Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
Specifications Product Classification Product Type Bending tool kit General Specifications Application Makes proper E and H bends Tool Type Bending tool Dimensions Waveguide Size WR42�WR90 | WG20�WG16 | R220�R100 Material Specifications Material Type Steel Packaging and Weights Height, packed 137.2 cm | 54.016 in Width, packed 38.7 cm | 15.236 in Length, packed 10.2 cm | 4.016 in Packaging quantity 1 Weight, gross 2.52 kg | 5.556 lb Regulatory Compliance/Certifications Agency Classification ISO...
ANDREW SOLUTIONS' cable flaring tool kit is made for use with HELIAX EWP63S, EWP63, and EW63 elliptical waveguide cable. This cable flaring tool produces consistently accurate waveguide flares for connector and splice attachments. This waveguide cable preparation tool kit includes both a major-axis flaring tool and a minor-axis flaring tool. Plus, this flaring tool kit comes with a saw guide and a rugged carrying case. No special training is required to use this tool kit. Follow the easy two-step...
Specifications Product Classification Product Type Flaring tool kit General Specifications Application Aids in field installation of connectors Thread Size 1/4 in Tool Type Flare tool Dimensions Waveguide Size WR187 | WG12 | R48 Material Specifications Material Type Steel Packaging and Weights Height, packed 36 cm | 14.173 in Width, packed 26 cm | 10.236 in Length, packed 11 cm | 4.331 in Included Screws | Washers Packaging quantity 1 Weight, gross 2.22 kg | 4.894 lb Regulatory Compliance/Certifications...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Thread Size #8 Tool Type Flare tool Dimensions Waveguide Size WR42 | WG20 | R220 Material Specifications Material Type Steel Packaging and Weights Height, packed 26.7 cm | 10.512 in Width, packed 20.3 cm | 7.992 in Length, packed 10.2 cm | 4.016 in Included Screw wrench Packaging quantity 1 Weight, gross 1.15...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Tool Type Flare tool Dimensions Waveguide Size WR90 | WG16 | R100 Material Specifications Material Type Steel Packaging and Weights Height, packed 26.7 cm | 10.512 in Width, packed 20.3 cm | 7.992 in Length, packed 10.2 cm | 4.016 in Packaging quantity 1 Weight, gross 1.82 kg | 4.012 lb Regulatory Compliance/Certifications...
Specifications Product Classification Product Type Bending tool kit General Specifications Application Makes proper E and H bends Tool Type Bending tool Dimensions Waveguide Size WR187 | WG12 | R48 Material Specifications Material Type Steel Packaging and Weights Height, packed 53 cm | 20.866 in Width, packed 15 cm | 5.906 in Length, packed 3.8 cm | 1.496 in Packaging quantity 1 Weight, gross 3.01 kg | 6.636 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured...
Metallics Rapid-Set MRST1420 Anchor Setting Tool Metallics Rapid-Set MRST1420 Anchor Setting Tool
Specifications Product Classification Product Type Bending tool kit General Specifications Application Makes proper E and H bends Tool Type Bending tool Dimensions Waveguide Size WR90�WR159 | WG16�WG13 | R100�R58 Material Specifications Material Type Steel Packaging and Weights Height, packed 20.3 cm | 7.992 in Width, packed 20.3 cm | 7.992 in Length, packed 20.3 cm | 7.992 in Packaging quantity 1 Weight, gross 2.05 kg | 4.519 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Tool Type Flare tool Dimensions Waveguide Size WR137 | WG14 | R70 Material Specifications Material Type Steel Packaging and Weights Height, packed 38.1 cm | 15 in Width, packed 27.9 cm | 10.984 in Length, packed 12.7 cm | 5 in Packaging quantity 1 Weight, gross 4.54 kg | 10.009 lb Regulatory Compliance/Certifications...
Specifications Product Classification Product Type Flaring tool kit General Specifications Application Aids in field installation of connectors Thread Size #10 Tool Type Flare tool Dimensions Waveguide Size WR159 | WG13 | R58 Material Specifications Material Type Steel Packaging and Weights Height, packed 36.2 cm | 14.252 in Width, packed 26 cm | 10.236 in Length, packed 11.4 cm | 4.488 in Included Screws | Washers Packaging quantity 1 Weight, gross 2.22 kg | 4.894 lb Regulatory Compliance/Certifications...
This special trimming tool improves the cable preparation prior to connector attachment. No further tools are required to prepare the cable for the connector attachment. This is due to the unique design of the trimming tool, which combines all necessary functions in one tool. It can be used for all CELLFLEX® LCF78-50 cables in combination with the OMNI FIT Standard connector families C02 and B32 The Universal Trimming Tools Series offers the additional advantage to be convertible to different...
This is an optional connector preparation tool for CELLFLEX ® cables with solid inner conductor. - It helps to remove the residual dielectric from the inner conductor of cables during the preparation for connector installation. - It enables clean contact areas without any risk of surface degradation. FEATURES / BENEFITS Enables clean contact surfaces without risk of scratching and nickingFinger grippers permit application of sufficient forceRemoves dielectric close to the cutting areaHelps...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Tool Type Flare tool Dimensions Waveguide Size WR229 | WG11 | R40 Material Specifications Material Type Steel Packaging and Weights Height, packed 30.2 cm | 11.89 in Width, packed 26 cm | 10.236 in Length, packed 11.4 cm | 4.488 in Packaging quantity 1 Weight, gross 4.74 kg | 10.45 lb Regulatory Compliance/Certifications...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Thread Size #8 Tool Type Flare tool Dimensions Waveguide Size WR62 | WG18 | R140 Material Specifications Material Type Steel Packaging and Weights Height, packed 26.7 cm | 10.512 in Width, packed 20.3 cm | 7.992 in Length, packed 10.2 cm | 4.016 in Included Screw wrench Packaging quantity 1 Weight, gross 1.3...
Specifications Product Classification Product Type Flaring tool kit Ordering Note CommScope� non-standard product General Specifications Application Aids in field installation of connectors Thread Size #8 Tool Type Flare tool Dimensions Waveguide Size WR42 | WG20 | R220 Material Specifications Material Type Steel Packaging and Weights Height, packed 26.7 cm | 10.512 in Width, packed 20.3 cm | 7.992 in Length, packed 10.2 cm | 4.016 in Included Screw wrench Packaging quantity 1 Weight, gross 1.1...
For use with Low Resistance Tester, item 35100 Easy to use - pass/fail indication Passive device, power source not required Made in the United States of America for superior quality This item is made and stocked in Chino, CA. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
TIG Torch Cable Cover with Zipper Heavy duty nylon cable cover protects your investment in your TIG or MIG torch leads by helping to prevent cable cuts and abrasions. Length = 98 ft Width = 3 in Application = TIG(Tungsten Inert Gas) Material = Woven Black Nylon Suitable for Torch Size = 12, 27 Operating Temp = 410F Resistance = Mildew, Aging, Abrasion Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This...
Metallics TAPCON IT1000 Concrete Screw Installation Kit, Steel, Black Metallics TAPCON Concrete Screw Installation Kit, Steel, Black
Specifications Product Classification Product Type Saw guide General Specifications Application Ensures proper cut-off length for flare Tool Type Saw guide Dimensions Waveguide Size WR112 | WG15 | R84 | WR137 | WG14 | R70 | WR159 | WG13 | R58 Packaging and Weights Height, packed 10 cm | 3.937 in Width, packed 0.3 cm | 0.118 in Length, packed 10 cm | 3.937 in Packaging quantity 1 Weight, gross 0.02 kg | 0.044 lb Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured...
Beautiful ceramic brush holder This item is made and stocked in Santa Barbara, CA. This item available now on eBay! Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
Beautiful ceramic brush holder This item is made and stocked in Santa Barbara, CA. This item available now on eBay! Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
ESD Brushes are ideal for removing dust, dirt, and foreign object debris from printed circuit boards (PCB) and other static sensitive components Allows thorough cleaning of ESD sensitive assemblies without the danger of high charges generated by conventional brushes when held by grounded personnel Non-magnetic, lightweight aluminum handle ESD properties of conductive handles are not affected by humidity as are wooden handle brushes Conductive bristles made of black soft carbon nylon Soft bristles...
Perfect for chemical and shampoo applications Features two pockets 29-1/2" long, with adjustable neck strap Apron ties around the waist in the back Made in the United States of America Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
Beautiful dish for powder This item is made and stocked in Santa Barbara, CA. Closeout items are subject to a 90-day warranty for materials and workmanship. No credit will be issued. to approve exchange for similar items. This list is for Each.
Eaton EAT-9097 Touchless Door & Handle Opener Tool, Cleanable, Sanitizable Eaton EAT-9097 Touchless Door & Handle Opener Tool, Cleanable, Sanitizable
Metallics HDT14 Magnetic Hand Driver, 1/4 in Hex Tip, Round Shank Metallics Hand Driver, Magnetic, 1/4 in Hex Tip, Round Shank
Metallics 681032 3-in-1 Tap Threaded Cleaning Tool, #6-32, #8-32, #10-32 Metallics Cleaning Tool, 3-in-1 Tap Threaded, #6-32, #8-32, #10-32
Specifications Product Classification Product Type Saw guide General Specifications Application Ensures proper cut-off length for flare Tool Type Saw guide Dimensions Waveguide Size WR62 | WG18 | R140 | WR75 | WG17 | R120 | WR90 | WG16 | R100 Packaging and Weights Height, packed 6 cm | 2.362 in Width, packed 6.2 cm | 2.441 in Length, packed 0.3 cm | 0.118 in Packaging quantity 1 Regulatory Compliance/Certifications Agency Classification ISO 9001:2015 Designed, manufactured and/or distributed under...
Metallics HDT2 Slotted Head Hand Drive Tool Metallics Hand Drive Tool, Slotted Head, For Use With: DP1 through 8 Hand Drive Pins
Metallics MPWSNP 14-in-1 Multi-Tool Plier With Black Plastic Handle Grip, Plastic Handle, Stainless Steel Metallics MPWSNP 14-in-1 Multi-Tool Plier With Black Plastic Handle Grip, Plastic Handle, Stainless Steel
© 2002-2025 Neobits Inc. All rights reserved.
© 2002-2025 Neobits Inc. All rights reserved.