HVAC Equipment & Components

KWIK CHARGELIQUID LOWCountry of Origin: PEOPLE'S REPUBLIC OF CHINAThis listing is for Each.

H25N RADIANT HEATER NATGASCountry of Origin: UNITED STATESThis listing is for Each.

H22L RADIANT PROPANE HEATERCountry of Origin: UNITED STATESThis listing is for Each.

Cover For 16 In Units, Fits Brand Portacool, For Use With Mfr. Model Number PAC163SVT, PACJS1600 This listing is for each.

Motor, For Use With Mfr. Model Number 7037 This listing is for each.

Technical Specification Item Regulator For Use With Mfr. Model Number MH-150V-GFA Fits Brand Master This item is restricted for international sale.

AIR CONTROL TYPE; CAST IRON (BODY), COPPER PLATED (TUBE), BRASS (VENT TUBE FITTING), STAINLESS STEEL (BALL CHECK) MATERIAL; TANK FITTING; 16 TO 18 INCH COMPRESSION TANK USED ON ITEM

1/8" TO 1-1/8" TUBING CUTTER WITH ST.STEEL WHEELCountry of Origin: TAIWAN; REPUBLIC OF CHINAThis listing is for Each.

Compressor, 115V, Fits Brand Danfoss, For Use With Mfr. Model Number 114N2318 This listing is for each.

DXM Control Board, Fits Brand Carrier This listing is for each.

Motor with Start Cap, 1/20 HP, 115V, Fits Brand Reznor This listing is for each.

Flaring kits include a hand-operated tool with attachments to create different types of flares in a range of tubing sizes. Flaring creates a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. Flares are commonly used to connect refrigerant tubing on mini-split line sets.

30 INCH; STEEL HUB/SPIDER ALUMINUM BLADE MATERIAL; 1 YEAR LIMITED WARRANTY; 1 SPEED(S); COATED STEEL GRILL MATERIAL; LOW/HIGH SPEED SETTINGS; PEDESTAL STAND TYPE; APPLICABLE STANDARD ETL (CANADA AND US), OSHA; AIR FLOW RATING 4600 CFM

CABLE TIE- UVB- 14" (75LB) 1000/BAGCountry of Origin: PEOPLE'S REPUBLIC OF CHINANOTE: This is a special-order item; as such it is not returnable for any reason. Manufacturer warranties apply and cover the purchase in case of defect. Warranties are fulfilled directly by the manufacturer.This listing is for Case of 5.

The Weller conical tip is sold 1 pack per case and is another quality product from Weller. Offers a conical tip. The important aspects of buying these products, for proper sizing, are the width, length and thickness of the tip. This product comes with a tip width of 0.015 in, length of 1 in and thickness of. This conical tip is designed to work with TC201 - Soldering Iron. Additional, and potentially important, information was collected about this product: Tip Temperature: 700 F This listing is...

The Weller soldering iron stand is sold 1 per pack and is another quality product from Weller. This soldering iron stand is designed to work with EC1201A - Soldering Pencil, EC1201P - Soldering Iron, EC1204P - Soldering Iron, TC201T - Soldering Iron. Additional, and potentially important, information was collected about this product: Product Description: Iron Holder, ESD Safe This listing is for each

MR. HEATER PORTABLE PROPANE TANK TOP COOKERCountry of Origin: PEOPLE'S REPUBLIC OF CHINAThis listing is for Each.

The Weller Marksman 12 w soldering iron is another quality product from Weller. Provides an output wattage of 12 w. This listing is for each

SCOTCHCAST 3507G CONNECTOR SEALING PACKSCountry of Origin: UNITED STATESThis listing is for Case of 100.

LOW STAND TYPE; 1 PHASE(S); UL (CANADA AND US) APPROVAL; 115 VOLT AC VOLTAGE RATING; 1/5 HP POWER RATING; 1180 RPM (LOW), 1350 RPM (MEDIUM), 1600 RPM (HIGH) SPEED RATING; 2295 CFM (LOW), 2755 CFM (MEDIUM), 3390 CFM (HIGH) AIR FLOW RATE

120 V 1.1 AMPERE 1-PHASE INPUT SUPPLY RATING; 825 CFM FLOW RATE; ALUMINUM BLADE MATERIAL; 1/12 HP POWER RATING; EXHAUST FAN; 1560 RPM SPEED RATING; WALL MOUNT MOUNTING TYPE; DIRECT DRIVE DRIVE TYPE; 12 INCH BLADE DIAMETER; 3 SPEED(S); DEPTH 7.18 INCH

Handheld flaring tools are gripped with one hand while turning their flaring cone handle with the other hand. They have multiple slots that hold tubing of different sizes and clamp it in place as the flaring cone presses into the end of the tube. Flaring tools create a funnel-shaped end (flare) that forms a tight joint with a flared tube fitting, eliminating the need for brazing or soldering. The flare height is adjusted by moving the tubing up or down in the slot before flaring. Tube flaring tools...

The Weller cutting tip is sold 1 per pack and is another quality product from Weller. Offers a cutting tip. The important aspects of buying these products, for proper sizing, are the width, length and thickness of the tip. This product comes with a tip width of 0.34 in, length of 0.885 in and thickness of. This cutting tip is designed to work with 8200 - Soldering Iron, D550 - Soldering Gun, D650 - Soldering Gun. Additional, and potentially important, information was collected about this product:...

The Weller needle tip is sold 1 pack per case and is another quality product from Weller. Offers a needle tip. The important aspects of buying these products, for proper sizing, are the width, length and thickness of the tip. This product comes with a tip width of 0.015 in, length of 0.437 in and thickness of. This needle tip is designed to work with EC1301 - Soldering Iron, EC1302 - Soldering Iron. This listing is for each

Airmaster Fan 78967 Portable Utility Blower - 300 CFM Key Features 120V, 60Hz, 3 speed, 1.77 amp draw, ball bearing motorUp to 300 CFM airflow3 speed selector switch8.5' cord with grounded plugCompact portable design with impact resistant shellRubber contact pads for surface protectionCarrying handleAdjustable air directionRe-settable circuit breaker protection2 120V, 10 amp receptacles with protective coversCSA listed

12 in. Direct Drive Shutter Exhaust Fan, Flow Rate- 560/710/825CFM, 120 V, 1 PH, 1.1 AMP, Fan Speed- 1080/1250/1560 RPM, AC Motor, Steel (Guard) Housing Material 12 IN Direct Drive Shutter Exhaust Fan, Flow Rate- 560/710/825CFM, 120 V, 1 PH, 1.1 AMP, Fan Speed- 1080/1250/1560 RPM, AC Motor, Steel (Guard) Housing Material This listing is for Each.

Time Delay Relay, Fits Brand Carrier, For Use With Mfr. Model Number 38AKS014-620 This listing is for each.

BRASS FIRE NOZZLE 2 NPSHCountry of Origin: UNITED STATESThis listing is for Box of 6.

71590_HEAD ASSY AIRMASTER FANCountry of Origin: UNITED STATESThis listing is for Each.

RATCHETING TUBING CUTTERCountry of Origin: TAIWAN; REPUBLIC OF CHINAThis listing is for Each.

37772_WALL MOUNT FOR 37212 FAN W/SAFEY CABLECountry of Origin: PEOPLE'S REPUBLIC OF CHINAThis listing is for Each.

PT Series Screwdriver Tip for TC201 Series Iron Solid copper, plated with iron all over Designed to provide maximum heat transfer from the heater to the tip Individually bagged Tinned with lead-free solder This listing is for Pack of 10

Supco part number CD45+7.5X440R Round Dual Run Capacitor - 45 + 7.5 MFD 440/370 Volts Supco capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. Supco always strives to supply excellent quality products at an economic price. Features/Benefits Type Two Made at Supco in Nanchang. Jiangxi China Non-PCB Biodegradable Synthetic Oil Physical Interrupter for Safety Drawn Steel Case Construction Quad Blade...

NON OSCILLATING TYPE; 1 PHASE(S); HEAVY DUTY, INDUSTRIAL APPLICATION; 115/230 V VOLTAGE RATING; DIE CAST ALUMINUM BLADE MATERIAL; CEILING MOUNTING; CLASS I GROUP D, CLASS II GROUP E F G ENCLOSURE; 1/4 HP POWER RATING; 1140 RPM SPEED RATING

Supco CR45X440R, 45MFD, 440V, Run, Round SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

PT Series Screwdriver Tip for TC201 Series Iron Solid copper, plated with iron all over Designed to provide maximum heat transfer from the heater to the tip Individually bagged Tinned with lead-free solder This listing is for Pack of 10

Supco CD60+7.5X440R, 60+7.5MFD, 440V, Run, Round SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating...

Supco CD35+5X440, 35 + 5 MFD, 440V, Run, Oval Non - PCB biodegradable synthetic oilPhysical interrupter for safetyOperating temperature -13°F to + 185°F (- 25°C to + 85°C)Microfarad uF tolerance +/- 5 %Drawn steel case constructionQuad blade quick connect terminalsHermetically sealed This listing is for Pkg of 5.

THERMOCOUPLECountry of Origin: SPAINThis listing is for Box of 6.

Supco CD40+5X370, 40 + 5MFD, 370V, Run, Oval SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating...

Supco , 12.5MFD, 370V, Run, Oval SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

Supco CR4X370, 4MFD, 370V, Run, Oval SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

Supco CD45+5X440, 45+5MFD, 440V, Run, Oval Non - PCB biodegradable synthetic oilPhysical interrupter for safetyOperating temperature -13°F to + 185°F (- 25°C to + 85°C)Microfarad uF tolerance +/- 5 %Drawn steel case constructionQuad blade quick connect terminalsHermetically sealed This listing is for Pkg of 5.

Supco CR35X370, 35MFD, 370V, Run, Oval SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

Supco CD25+5X440R, 25 + 5MFD, 440V, Run, Round SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating...

Supco CD50+7.5X440R, 50+7.5MFD, 440V, Run, Round SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating...

Supco CD80+7.5X440R, 80+7.5MFD, 440V, Run, Round Non - PCB biodegradable synthetic oilPhysical interrupter for safetyOperating temperature -13°F to + 185°F (- 25°C to + 85°C)Microfarad uF tolerance +/- 5 %Drawn steel case constructionQuad blade quick connect terminalsHermetically sealed

Supco part number CD80+5X440R Round Dual Run Capacitor - 80 + 5 MFD 440/370 Volts AC Supco capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. Supco always strives to supply excellent quality products at an economic price. Features/Benefits Type Two Made at Supco in Nanchang. Jiangxi China Non-PCB Biodegradable Synthetic Oil Physical Interrupter for Safety Drawn Steel Case Construction Quad Blade...

Supco CD35+5X370, 35+5MFD, 370V, Run, Oval Non - PCB biodegradable synthetic oilPhysical interrupter for safetyOperating temperature -13°F to + 185°F (- 25°C to + 85°C)Microfarad uF tolerance +/- 5 %Drawn steel case constructionQuad blade quick connect terminalsHermetically sealed This listing is for Pkg of 5.

The Weller soldering gun is sold 1 pack per case and is another quality product from Weller. This soldering gun is designed to work with GT Guns. This listing is for each

Rotom 25/5DVR, 25 + 5MFD, 370/440V, Run, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 35/5DV, 35 + 5MFD, 370V, Run, Oval UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Supco CR35X370R, 35MFD, 370V, Run, Round SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

Rotom 25/10DVR, 25 + 10MFD, 440V, Run, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 60DV, 60MFD, 370V, Run, Oval UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

38422_30"WALL MOUNT FANOSCILLATINGCountry of Origin: UNITED STATESThis listing is for Each.

Rotom 20/5DVR, 20 + 5MFD, 370/440V, Run, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 35/4DVR, 35 + 4MFD, 440V, Run, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 243B, 243-292MFD, 110/125V, Start, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminals

Supco CR30X370, 30MFD, 370V, Run, Oval SUPCO capacitors are manufactured with the highest quality components. Our capacitors are manufactured and tested under our high standards and specifications. SUPCO always strives to supply excellent quality products at an economic price. Features: Type TwoMade at Supco in Nanchang. Jiangxi, ChinaNon-PCB Biodegradable Synthetic OilPhysical Interrupter for SafetyMFD Tolerance +/- 5%Drawn Steel Case ConstructionQuad Blade Quick Connect TerminalsOperating Temperature:...

The Weller heating element is sold 1 per pack and is another quality product from Weller. This heating element is designed to work with WTCP Series Soldering Station. This listing is for each

Rotom 80/5DVR, 80+5MFD, 440V, Run, Round UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 12.5DV, 12.5MFD, 440V, Run, Oval UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60

Rotom 17.5DV, 17.5MFD, 370V, Run, Oval UL listed and CUL approvedIndividually boxedMetal casesMetallized filmOil filledNon PCB oilInsulated terminalsHertz: 50/60