Hubbell - HBL430MI5W - HUBBELL HUBBELL WIRING DEVICE KELLEMS HEAVY DUTY PRODUCTS IEC PIN AND SLEEVEDEVICES INDUSTRIAL GRADE FEMALE MECHANICALLY INTERLOCKED RECEPTACLE 30A 3-PHASE DELTA 600V AC 3-POLE 4-WIRE GROUNDING TERMINAL SCREWS BLACK WATERTIGHT (

ITEM #: 4979776
Unfused Circuit-Lock Pin and Sleeve Mechanical Interlocks - The National Electrical Code (NEC) requires a separate disconnect means within sight of all motor loads. The NEC requires the disconnecting means in a motor-circuit be listed as Suitable as Motor Disconnect if the motor is rated greater than 2 HP. Hubbells revolutionary Circuit-Lock interlock incorporates the disconnect switch and receptacle in one compact, non-metallic and economical unit. Removing the plug and locking it out provides a visual means of verifying equipment has been disconnected. All Circuit-Lock mechanical interlocks can be locked out as a method of compliance with the OSHA Lockout/Tagout regulation. The switch cannot be turned ON until the plug is completely engaged, and the plug cannot be removed until the switch is turned OFF. At the same time, it eliminates the possibility of making or breaking the circuit under load or making a casual or lazy connection. The non-metallic enclosure can be connected to the metallic conduit and not interfere with the ground continuity. In addition, these horsepower rated units are durable, watertight and easy to install. And they are compatible with IEC 60309-2 plugs. These Circuit-Lock units are available in 20, 30, 60 and 100A models, and in 3, 4 and 5 wire configurations that are designed to the IEC 60309-1 and 60309-2 standards. Hubbells Circuit-Lock Mechanical Interlocks are also available in Reverse Service versions. These units incorporate the disconnect switch and reverse service receptacle (inlet) in one compact, non-metallic and economical unit. These units are available in 30, 60 and 100A models, 4 wire configurations.
This listing is for Each.