Evaporators

Unique 5L Rotary Evaporator design fills the opening between benchtop and industrial evaporators systems. Features a large bath for a 5L flask. Continuous reflu x with a 3L receiving flask and a reflu x valve and a bottom drain valve for the receiving flask. Motorized lift with push button control. Heating temperature range from ambient to 180°C. Adapter, Feed and Condenser, For CG-1334-X-50 Rotary Evaporator This listing is for Each

Trap is designed to eliminate hold up common to the round style of rotary evaporator traps. Tapered sidewalls permit continuous washing with condensed solvent while preventing vapor cooling points along the path of the condenser. The upper stem has 4 large holes flush with the lower end, allowing solvent vapor to flow freely and making this portion of the trap easy to clean. The increased volume of the trap prevents “bumping” and keeps solvent out of the vapor tube. Bump Trap, 250mL,...

Quickly process multiple samples to recover as small as a few microliters! Recover as small as a few microliters of your sample ... The Labconco CentriVap benchtop vacuum concentrator is the perfect unit for small samples, allowing you to collect as small as a few microliters of your sample. The concentrator uses gentle centrifugal force, heat, and vacuum to quickly evaporate solvents from up to 148 samples. Easily change out the rotor to process samples from a few microliters up to 25 mL; order...

ADAPTER, FRITTED INLET FEED FOR ROTARY EVAPORATOR^ Replacement Components. Glass Portion Only. Adapter eliminates the need for a separate filtration step to remove drying agents for other particulate matter from organic solutions prior to rotary evaporation. This listing is for Each

ADAPTER, FRITTED INLET FEED FOR ROTARY EVAPORATOR^ Complete Apparatus. Inlet Feed Adapter, Fritted, 19/38. Adapter eliminates the need for a separate filtration step to remove drying agents for other particulate matter from organic solutions prior to rotary evaporation. This listing is for Each

The 6 position N-EVAP’s ability to e x pand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits samples with an outside diameter of 10-30 mm, and the optional large sample holder can accommodate samples with an outside diameter of 30-56 mm. The 6 position N-EVAP nitrogen evaporator (cat# 11106) was adapted...

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone. Available in either individual components or in an easy-to-use kit. PTFE connecting adapter multipak with Chemraz o-rings, connects 15mm Ace-Thred to 8-425, 13-425, 15-425, 18-400, 20-400, 22-400 and 24-410...

PTFE connecting adapters and glass conversion adapters for connecting GPI threaded vials to a rotary evaporator vapor tube or trap. Both are suitable for vacuum work. PTFE connecting adapters are available with FETFE or Chemraz o-rings. Order Chemraz if you are using Methylene Chloride or Acetone. Available in either individual components or in an easy-to-use kit. PTFE connecting adapter multipak with Chemraz o-rings, connects 15mm Ace-Thred to 8-425, 13-425, 15-425, 18-400, 20-400, 22-400 and 24-410...

Fits Cold-trap reflux, Vertical with shut-off valve, and Descending condensers. Büchi is a registered trademark of Büchi Labortechnik AG Rotavapor is a registered trademark of Büchi Labortechnik AG

This optional Woulff flask may be connected in front of pump as a vacuum reservoir to protect pump from liquids accidentally sucked into vacuum line. Recommended in stand-alone systems using a V-700/710 pump. Includes retaining ring for V-700. Büchi is a registered trademark of Büchi Labortechnik AG

The extra-coarse fritted disc (diameter: 20 mm, porosity A, 145-174 micron) prevents solids from being pulled into the condenser when removing solvents from solid-solvent mixtures. Overall adapter length: 150 mm. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Unique 5L Rotary Evaporator design fills the opening between benchtop and industrial evaporators systems. Features a large bath for a 5L flask. Continuous reflu x with a 3L receiving flask and a reflu x valve and a bottom drain valve for the receiving flask. Motorized lift with push button control. Heating temperature range from ambient to 180°C. Condenser, Rotary Evaporator, 5L, For CG-1334-X-50 Rotary Evaporator This listing is for Each

Evaporate samples efficiently and with ease using Thermo Scientific Reacti-Vap Evaporators. Designed for use with Thermo Scientific Reacti-Therm Modules, these precision-machined gassing manifolds enable simultaneous or separate delivery of nonreactive pressurized gas to samples. Reacti-Vap PTFE-Coated Needles, made e x clusively for use in Reacti-Vap Evaporators, are blunt-ended, 19-gauge, stainless steel needles that reduce cross-contamination and corrosion when evaporating solvents that contain...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

Precise setting of rotation speed and heating bath temperature on the digital touch display or - for quick access during an active process - directly via the knobs on the operating panel.Central operating panel with 5“ touch displayClear display of all values (Basic and Advanced modes)With timer, limitation of ma x . temperature, multilingual menu and te x t display for error messagesSeparate knobs for rotation and heating with locking function to prevent accidental readjustingLED ring lights...

The Refrigerated CentriVap Centrifugal Concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. This e x clusive concentrator combines a refrigeration system that cools to -4°C with a heater that warms to 100°C to achieve the user’s desired set point temperatures. Features Brushed stainless steel and glacier white, epo x y-coated steel e x terior with blue accentsLid...

CentriZap Strobe Light Enables user to shine a strobe light into the CentriVap’s chamber to easily view samples while the rotor is spinning. Includes mounting holster and hardware for attachment to the right side of the CentriVap. Shipping weight 2 lbs. (0.9 kg) Glass Lid May be installed in place of the acrylic lid on the CentriVap Concentrator when applications involve solvents which attack acrylic. Included on CentriVap Solvent System and selected models of CentriVap Benchtop Concentrators....

VCV 1 Vacuum control valve manual, Allows for adjusting the set vacuum value on the manual manometer, Rod and stand Not included in delivery This listing is for Each

Processes up to 110 samples simultaneouslyMicroprocessor control RapidVap Vacuum Evaporation System, uses vorte x motion, vacuum and heat to prepare samples for a variety of applications including drug discovery, agrichemistry, mycology testing and environmental analysis. Up to 110 samples may be processed at once. System utilizes the same vacuum pumps as the CentriVaps. Features include microprocessor-controlled vacuum level; micro-processor controlled 1000-watt dry block heating system; micro-processor...

The Ai SolventVap series rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area e x tremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap...

Block tube capacity: 8. Sample tube size: 600 ml borosilicate glass tube. Sample volume: 450 ml. Actual sample volume depends on tube shape, height and vortex speed. Blocks fit inside RapidVap Evaporation Systems. Glassware is required (not included).

Block tube capacity: 110. Sample tube size: 12 mm OD tubes, up to 6 ml. Maximum tube height: 150 mm. Sample volume: 4.5 ml. Actual sample volume depends on tube shape, height and vortex speed. Blocks fit inside RapidVap Evaporation Systems. Glassware is required (not included).

Block tube capacity: 69. Sample tube size: 16 mm OD tubes, up to 23 ml. Maximum tube height: 150 mm. Sample volume: 17 ml. Actual sample volume depends on tube shape, height and vortex speed. Blocks fit inside RapidVap Evaporation Systems. Glassware is required (not included).

For use with RapidVap N2 Evaporation Systems only. Not compatible with the RapidVap N2/48 Dry Evaporation System (which cannot accomodate stemmed glassware). The ground glass tubes offer better fit and heat transfer for faster evaporation rates. The stems are designed for use with Cool-Zone timed end point determinations. To minimize evaporation time, the tube with the correct end point stem should be used. Flat-bottom tubes are for use in applications when samples are taken to dryness. Use the...

Enhance the performance of your Labconco CentriVap Vacuum Concentrator with these accessories Choose replacement parts or optional accessories based on your application needs ... Choose from a wide range of rotors and other accessories suitable for use with your Labconco CentriVap Complete Vacuum Concentrator. This listing is for Each.

Enhance the performance of your Labconco CentriVap Vacuum Concentrator with these accessories Choose replacement parts or optional accessories based on your application needs ... Choose from a wide range of rotors and other accessories suitable for use with your Labconco CentriVap Complete Vacuum Concentrator. This listing is for Each.

Labconco* Rotor^ 28mm. Holds 44 tubes: 32 of 1.5-2.0mL microcentrifuge tubes, and 12 of 28mm tubes. For use with all CentriVap* centrifugal concentration systems, except DNA system. This listing is for Each

Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping.” Traps have a 24/40 top outer joint and the listed size of lower inner joint. Bump Trap, 250mL, Rotary Evaporator, 24/40 Top Outer, 29/42 Lower Inner This listing is for Each

Rotor^ Microtiter Plate, for CentriVap Centrifugal Concentrators for Acids. PTFE-coated with PTFE hub. Holds 4 standard or 2 deep well plates. This listing is for Each

Rotor^ DNA, for CentriVap Centrifugal Concentrators for Acids. PTFE-coated with PTFE hub. Holds 72 0.5 ml microcentrifuge tubes and 60 1.5 or 2.0 ml microcentrifuge tubes. This listing is for Each

Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20

SCILOGEX RE100-Pro LCD Rotary Evaporator, Vertical Coiled Condenser, Motorized Lift SCILOGEX RE100-Pro Rotary Evaporator including vertical coiled condenser, 5L bath, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20, 110V, 50/60Hz, US Plug. Features: Digital display of both rotation speed and heating temperature allows for optimal control of all distillation processes5L heating bath with wide temperature range from room temp. to 180°CPatented condenser (cooling surface...

SCILOGEX RE100-Pro LCD Rotary Evaporator, Vertical Dry-Ice Condenser, Motorized Lift SCILOGEX RE100-Pro Rotary Evaporator including vertical dry-ice condenser, 5L bath, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20, 110V, 50/60Hz, US Plug. Features: Easy to read large digital LCD display shows temperature, rotation speed and timerLarge 5L heating bath with a temperature range of ambient to 180°CMotorized lift with safety automatic release of the evaporating flask to...

Evaporate samples efficiently and with ease using Thermo Scientific Reacti-Vap Evaporators. Designed for use with Thermo Scientific Reacti-Therm Modules, these precision-machined gassing manifolds enable simultaneous or separate delivery of nonreactive pressurized gas to samples. Reacti-Vap PTFE-Coated Needles, made e x clusively for use in Reacti-Vap Evaporators, are blunt-ended, 19-gauge, stainless steel needles that reduce cross-contamination and corrosion when evaporating solvents that contain...

Caron’s condensate recirculator turns both standard tap water and environmental chamber condensate into lab quality 1 megOhm water. The CRS is a compact and easy to install alternative to e x pensive whole-lab water systems, and recycles condensate water i Universal Condensate Recirculating System; 115V, 60Hz This listing is for Each

Fits R114, R124, R210 & R215 evaporators. Büchi is a registered trademark of Büchi Labortechnik AG

Büchi is a registered trademark of Büchi Labortechnik AG Rotavapor is a registered trademark of Büchi Labortechnik AG

With Combi-clip. Büchi is a registered trademark of Büchi Labortechnik AG

With Combi-clip. Büchi is a registered trademark of Büchi Labortechnik AG

With side hose connection and drip-tip. Improves efficiency of evaporation of solvents under reduced pressure when placed between the condenser of a rotary evaporator and a chilled receiving flask. Plug the condenser vacuum take-off exit opposite the receiving flask to eliminate path competition and direct all distillate to the chilled collection flask. SJ 35/25 adapter fits standard Büchi rotary evaporator glassware. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

The extra-coarse fritted disc (diameter: 20 mm, porosity A, 145-174 micron) prevents solids from being pulled into the condenser when removing solvents from solid-solvent mixtures. Overall adapter length: 150 mm. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

Effectively prevents upward movement of foaming or bumping liquids in rotary evaporator traps. Unique design has two baffles with horizontally opposing holes that may also be used with other distillation techniques. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

CentriVap Rotors CentriVap 12 x 32 mm Rotor, holds 66Vials This listing is for Each

Enhance the performance of your Labconco CentriVap Vacuum Concentrator with these accessories Choose replacement parts or optional accessories based on your application needs ... Choose from a wide range of rotors and other accessories suitable for use with your Labconco CentriVap Complete Vacuum Concentrator. This listing is for Each.

Rotary evaporator accessories work with rotary evaporators to replace worn equipment and extend capabilities.

The newly developed product line from IKA in ergonomic, compact design with innovative functions to improve operating results. Rotary evaporators with integrated heating bath HB 10 basic (3 litre) inc. space saving vertical glassware (1 litre). Heating bath with adjustable safety circuit, "stand alone" operation possible, pivoting safety hood as accessorySafe and simple operation through ergonomically shaped operator unit in the front areaMotorised lift (stroke 140 mm) with "safety...

Comes with hose barbs and drain sleeve. Büchi is a registered trademark of Büchi Labortechnik AG Rotavapor is a registered trademark of Büchi Labortechnik AG

With side hose connection and drip-tip. Improves efficiency of evaporation of solvents under reduced pressure when placed between the condenser of a rotary evaporator and a chilled receiving flask. Plug the condenser vacuum take-off exit opposite the receiving flask to eliminate path competition and direct all distillate to the chilled collection flask. SJ 35/25 adapter fits standard Büchi rotary evaporator glassware. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

With side hose connection and drip-tip. Improves efficiency of evaporation of solvents under reduced pressure when placed between the condenser of a rotary evaporator and a chilled receiving flask. Plug the condenser vacuum take-off exit opposite the receiving flask to eliminate path competition and direct all distillate to the chilled collection flask. SJ 35/25 adapter fits standard Büchi rotary evaporator glassware. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

With side hose connection and drip-tip. Improves efficiency of evaporation of solvents under reduced pressure when placed between the condenser of a rotary evaporator and a chilled receiving flask. Plug the condenser vacuum take-off exit opposite the receiving flask to eliminate path competition and direct all distillate to the chilled collection flask. SJ 35/25 adapter fits standard Büchi rotary evaporator glassware. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

The extra-coarse fritted disc (diameter: 20 mm, porosity A, 145-174 micron) prevents solids from being pulled into the condenser when removing solvents from solid-solvent mixtures. Overall adapter length: 150 mm. Aldrich is a registered trademark of Sigma-Aldrich Co. LLC

This versatile adapter connects to jars and bottles and to the vapor tube of a rotary evaporator. Precision machined from durable, chemically inert glass-filled PTFE. The unique, "universal fit" threaded connection adapts to any suitable cap. Simply insert the threaded shaft of the adapter through a 16 mm diameter holed cap and secure by hand-tightening the PTFE gasket and nut. Attach the other end of the adapter to the vapor tube via standard taper joint and clip. Field Tested: This adapter...

Thomas No. 1203D08 Industrial vacuum source for many different in-house users; usually fixed pipes. Thomas No. 1203D09 For single or multiple connection bench top diaphragm vacuum pump. High quality vacuum valve for an optimum controlled operation. The integrated check valve eliminates external influence on the operating pressure in the vacuum chamber. Included with each RV 10 control system. Power: 24 V / 9 W Weight: 0.142 kg Integrated check valve: yes Thomas No. 1203D10 One rotary evaporator...

Block tube capacity: 8. Sample tube size: 170 ml borosilicate glass tube. Sample volume: 125 ml. Actual sample volume depends on tube shape, height and vortex speed. Blocks fit inside RapidVap Evaporation Systems. Glassware is required (not included).

The 12 Position N-EVAP nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying evaporation end points. The sample tray has a spring tensioner which allows any test tube between 10-30 mm to be processed without any modifications to the instrument. For customers with larger sample vials,...

Thomas No. 1203C97 Vertical intensive condenser with distributor and stop valve for reflux distillation. The distributor features a condensate cover and an outlet channel which prevent the condensate from coming into contact with the seal. The solvent to be distilled can be continuously fed in through the PTFE inlet tube. Thomas No. 1203C98 Vertical intensive condenser with distributor and stop valve for reflux distillation. The distributor features a condensate cover and an outlet channel which...

The IKA support rod and temperature sensor are suitable for use in research facilities and chemical laboratories while conducting e x periments. They are easy to handle and convenient to use. PT 1000.60 stainless steel temperature sensor, for use with RCT basic (3380001 and 3810001) and RET basic (3622001) This listing is for Each