Bulkhead Tank Fittings

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

Hayward BFA1020TFS bulkhead fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFAS1012TFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFAS2020CFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

Hayward BFA1030TFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFA1030SFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFA1040SFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

These through-wall fittings are constructed of CPVC (chlorinated polyvinyl chloride) which resists corrosion, chemicals, highly chlorinated water, and provides a higher resistance to heat than PVC (polyvinyl chloride). They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the...

Hayward BFA2010TFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFA2020SES Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFA1020TES Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

Hayward BFAS1012CFS Fitting provides versatility with a short pattern and an extended shaft option, accommodating both thinner and thicker tank walls and allowing for convenient one-person installation. This series is available in PVC, CPVC, PP, and GFPP materials, offering a wide range of options to suit different application needs. The gaskets used in the BFA Series are available in either FPM or EPDM, contributing to their durability and compatibility with diverse operating conditions.

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of 316 stainless steel and provide strong corrosion resistance. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These bolt-on fittings are constructed of glass-filled polypropylene which provides a moisture barrier, resists chemicals, abrasion, and is stronger than regular polypropylene. They install on a tank, drum, or fluid container with flanged components that fit inside and outside of the tank hole, sealing against the tank with a gasket, and fasten in place with bolts.

These bolt-on fittings are constructed of glass-filled polypropylene which provides a moisture barrier, resists chemicals, abrasion, and is stronger than regular polypropylene. They install on a tank, drum, or fluid container with flanged components that fit inside and outside of the tank hole, sealing against the tank with a gasket, and fasten in place with bolts.

These bolt-on fittings are constructed of glass-filled polypropylene which provides a moisture barrier, resists chemicals, abrasion, and is stronger than regular polypropylene. They install on a tank, drum, or fluid container with flanged components that fit inside and outside of the tank hole, sealing against the tank with a gasket, and fasten in place with bolts.

These bolt-on fittings are constructed of glass-filled polypropylene which provides a moisture barrier, resists chemicals, abrasion, and is stronger than regular polypropylene. They install on a tank, drum, or fluid container with flanged components that fit inside and outside of the tank hole, sealing against the tank with a gasket, and fasten in place with bolts.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

Hayward BFAS2010CFS Series BFAS Short Pattern Bulkhead Fitting, Socket x Threaded End, CPVC with FPM Seals, 1" Size Item Condition: New Brand: Hayward Industries, Inc. Item model number: BFAS2010CFS Size: 1" Product Information - Price For: Each Max. Wall Thickness: 1.08" Max. Pressure: 150 psi Required Hole Size: 1- 7/8" Pipe Size: 1" Item: Bulkhead Tank Fitting Length: 2- 7/8" Connection Type: FNPT x Socket Gasket Material: FPM Body Material: CPVC Temp. Range: 40 Degrees"

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of PVC (polyvinyl chloride) which resists corrosion, chemicals, and rust. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the fitting shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank. Refresh page to try again.

These through-wall fittings are constructed of polypropylene which provides a moisture barrier and is resistant to chemicals and abrasion. They install through the wall of the tank, drum, or fluid container by inserting the shaft through the hole of the tank from the inside so that the shaft is sticking out of the tank. A gasket seals the internal fitting as a nut is threaded onto the exposed shaft to secure it to the tank.