Baldor Electric / ABB - ECP4110T - - Baldor 40HP, 1775RPM, 3PH, 60HZ, 324T, TEFC, FOOT, Motor Super 'E'

ITEM #: 10628435
Applications: Petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, chemical plants, tropical climates and other processing industry applications requiring protection against corrosion caused by severe environmental operating conditions.
Features: ECP motors are XEX Designs. 1.15 Service Factor, corrosion resistant epoxy finish, regreasable ball or roller bearings, oversized rotatable cast iron conduit box, cast iron frames, V-Ring shaft seal, moisture resistant copper windings, Class F insulation, stainless steel nameplate and corrosion resistant hardware. ECP/XEX Super-E motors have NEMA Premium efficiency. Positive lubrication system (PLS) on 360 frame and larger.
ECP4110T
Manufacturer Warranty: 36 Months*
*Warranty is based on date of manufacture as indicated on the product nameplate. Baldor reserves the right to repair or replace any product that is deemed to be in warranty. All warranty claims are subject to verification by inspection at an authorized service center or the factory. Warranty covers material and workmanship only. Proof of purchase may be required. A 6-month shelf life from date of manufacture will be allowed on all Baldor-Reliance products. (18 month warranty + 6 month shelf life = 24 months from date of manufacture maximum.) Note: Certain high thrust pump or heavy belted motors may have normal bearing life that is less than motor warranty if built in an IEEE 841 configuration. Bearings are a maintenance item and are not subject to 60 month coverage.