Conduit locknut is used for 1 inch rigid or IMC conduit. Locknut is constructed of steel and is UL listed E-19189. Locknuts resist loosening under vibrations or torque.
Product Overview The 81540001 is a blue Logic Element with Ø4mm plug-in version. It performs combined pneumatic. Easy to use2.7mm Orifice diameter170Nl/minute Flow at 6 bars>10 operations Mechanical life Applications Automation & Process Control This listing is for Each.
Chase nipple is 4 inch and are malleable iron. Chase nipples are used through a knockout to connect a box to a conduit coupling, with a locknut to connector two boxes side by side or to connect fixture housing to a continuous run.
Product Overview The 81504025 is a logic pneumatic valve Pressure Decay Sensor with NO element. Applications Sensing & Instrumentation This listing is for Each.
Product Overview The 81513200 is a poppet Valve Module with 4/2 monostable function. It features on sub-base (below) connection. 1.5 x 10 Operations mechanical life200/300Nl/minute Flow rate-10 to 50°C Operating temperature range Applications Automation & Process Control This listing is for Each.
Product Overview The 81921701 is a miniature pneumatic Position Detector and control by lever with plastic roller. It is made of Zamak body material and 8bar maximum operating pressure. 100% PneumaticMetal EnclosurePush-in Connection for Semi-rigid Tubing Applications Automation & Process Control This listing is for Each.
Product Overview The 81923001 is an adjustable stop series metal Position Detector. 100% pneumatic≥10 Operations mechanical life Applications Industrial This listing is for Pack of 5.
Product Overview The R07-100-RNKG is a G1/8-inch port size General Purpose Regulator with zinc body, acetal bonnet, valve seat, brass/nitrile valve and ISO G parallel threads. This miniature series-07 regulator features compact design, low torque, non-rising adjusting knob. Snap action knob locks pressure setting when pushed in. Standard relieving models allow reduction of outlet pressure even when the system is dead-ended. Can be disassembled without the use of tools or removal from the air line....
Product Overview The 81513502 is an electrical output DIN-rail mount Pressure Switch with pneumatic indicator, 8-bar maximum operating pressure and without manual override. This pressure switch can be used without enclosure according to IEC 664-1 pollution group-III. Conform to the low voltage directive. 0.75mm² Wire cross-sectionIP20 Protection rating Applications Automation & Process Control This listing is for Each.
Product Overview The 81502160 is a 30 to 120psi monostable Adjustable Pressure Switch with negative output (NO). 3 Million mechanical life-5 to 50°C Operating temperature range Applications Industrial This listing is for Each.
Product Overview The 81580101 is a sub-base mounting Pneumatic Relay suitable for two-hand control. It complies with machinery directive and the standard EN 574 +A1. It supports 2 to 8bar operating pressure. The relay has typical application with double-acting cylinder connections. Type III A- EN 574 version10 operations Mechanical life Applications Automation & Process Control This listing is for Each.
Product Overview The 81505160 is a 30 to 120psi monostable Adjustable Pressure Switch with positive output (N.C). 3 Million mechanical life-5 to 50°C Operating temperature range Applications Industrial This listing is for Each.