Image is an illustration, may not reflect the exact product sold.


Other products by Yamato Scientific

Yamato Scientific - SK811 - Forced Convection Laboratory Dry Sterilizer, 300L 220V 11.5A 50/60Hz

  • Item #: 10071976
  • MFR SKU: SK811
$10,325.85
  • Saw It For Less?
Stock Status: Call For Stock (shipping delay possible)
Average lead time for this brand: less than a week. Specific products may vary.

Thomas Nos. 1171R41 and 1171R42
Programmable natural convection laboratory dry sterilizers.
Operations and functions
  • Improved temperature controller with better operability
  • Digital setting by main menu and up and down arrow keys for fixed temperature, program, quick auto stop, auto stop and auto start operations
  • Standard equipped with calibration off-set, lock function, power failure recovery mode
  • Programmable with maximum 30 steps,...
Thomas Nos. 1171R41 and 1171R42
Programmable natural convection laboratory dry sterilizers.
Operations and functions
  • Improved temperature controller with better operability
  • Digital setting by main menu and up and down arrow keys for fixed temperature, program, quick auto stop, auto stop and auto start operations
  • Standard equipped with calibration off-set, lock function, power failure recovery mode
  • Programmable with maximum 30 steps, 6 patterns, repeat operation

Increased safety features
  • Standard equipped with self diagnostic functions, earth leakage breaker and overheat prevention device

Thomas Nos. 1171R43 through 1171R46
Dry heat sterilizers with independent overheat prevention device.
Operations and functions
  • Programmable
  • High precision controller with improved display visibility and operability
  • Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO 2 emission, and heat output, save and access operator setting information
  • Maximum 99 steps, 99 patterns, repeat operation
  • Easy sample data collection with cable port

Safety features
  • Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker

For more information please see 'Additional Info' tab.
Forced Convection Laboratory Dry Sterilizer, 300L 220V 11.5A 50/60Hz
This listing is for Each
Read More >>

Yamato Scientific - SK811 - Forced Convection Laboratory Dry Sterilizer, 300L 220V 11.5A 50/60Hz

  • Item #: 10071976
  • MFR SKU: SK811
Model SI401 SI601
Circulation method Natural convection dry laboratory sterilizers
Operating temp. range* Room temp. +5~260°C
Temp. adjustment accuracy 2°C (at 260°C)
Temp. distribution accuracy 20°C (at 260°C)
Max. temp. reaching time ~70min.
Interior / Exterior Stainless steel / Chrome free electrogalvanized carbon steel sheet coated with chemical-proof baked-on finish
Heater Iron chromium wire heater / 1.2kW Iron chromium wire heater / 1.36kW
Sensor K type Thermocouple
Exhaust port I.D.30 mm x 2 (top)
Temp. controller PID control
Temp. display Measured temp. display: green 4 digit LED digital display / Setting temp. display: red 4 digit LED digital display
Timer 1 min~99hr 59 min and 100~999 hrs 30 min. (with timer wait function)
Operation function Fixed temperature, quick auto stop, auto stop, auto start, program (6 pattern: 30 steps x 1, 15 steps x 2, 10 steps x 3, pattern repeat function)
Additional functions Lock function, auto recovery after power failure, calibration off-set
Safety device Self diagnostic functions (temp. sensor failure, heater disconnection, SSR short circuit, memory error, internal communication error, measurement temperature error, automatic overheat prevention), overheat prevention device, earth leakage breaker
Internal dimensions WxDxH 450 x 430 x 400 mm 600 x 530 x 500 mm
External dimensions WxDxH 550 x 540 x 777 mm 700 x 640 x 877 mm
Internal capacity 77L 159L
Shelf plate with standard load ~15 kg / pc.
Shelf rest step number / pitch 10 steps / 30 mm 13 steps / 30 mm
Power source (50 / 60Hz) AC115V 10.6A AC115V 11.8A
Weight ~42 kg ~59 kg
Shelf plate material Stainless punching metal
Shelf plate / bracket 2pcs. / 4pcs. (bottom one is screwed)
  • SI401 601.pdf
  • SK

Recently Viewed Items