Safety: Safety Station with Eyewash, Stainless Steel Bowl and Cover Application: Combination eyewash and shower safety station. Eyewash has stainless steel cover to protect bowl from dust, dirt and other contaminants. Cover is raised automatically when flag handle is activated. Cover closes when handle is returned to closed position. Two GS-Plus spray-type outlet heads deliver a flood of water for rinsing eyes. Shower Head: 10 inches diameter orange ABS plastic. Shower Valve: 1 inches IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29 inches stainless steel pull rod. Spray Head Assembly: Two GS-Plus spray heads. Each head has an internal flow control and filter to remove impurities from water. Eyewash Bowl: 11-1/2 inches stainless steel with stainless steel cover. Eyewash Valve: 1/2 inches IPS chrome plated brass stay-openball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. Supply: 1-1/4 inches NPT female top or side inlet. Waste: 1-1/4 inches NPT female outlet. Outlet can be positioned at either 9-1/4 inches or 19-5/8 inches above finished floor by reversing lower pipe nipples. Sign: Furnished with ANSI-compliant identification sign. Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.