The Trylon 4.618.BSTG.050 is a 50ft bracketed tower built using standard STG tower sections. The kit contains everything necessary to build a bracketed tower including the tower sections, mounting brackets, and all attachment hardware. All steel parts of the 4.618.BSTG.050 are completely hot-dip galvanized per ASTM A153. Please consult the Tower Selection Guide below to determine if this tower will support your loading requirements. The loading capacity of the Trylon STG Bracketed Towers is dependent upon the tower's cantilever length which must be calculated as the overall tower height less the height of the house bracket attachment. Please consult the Tower Selection Guide attachment to determine if the tower height you have selected will support your antennas and wind pressure. recommends that you complete a Tower Design Questionnaire so we can make sure you are getting the right tower for your application. assumes no risk for any tower purchased without a completed Tower Design Questionnaire.

See other products in some related categories (click to browse):

Industrial & Scientific > Telecom Carrier Infrastructure > Base Station Infrastructure > Towers & Site Hardware > Towers

Mfg. Part No.: 4.618.BSTG.050Tower Height (ft): 50EPA, 70mph/no ice (sq-ft): See Tower Selection GuideEPA, 80mph/no ice (sq-ft): See Tower Selection GuideEPA, 90mph/no ice (sq-ft): See Tower Selection GuideLoad Location: TopLeg Size (in): 7/8Leg Connection: Single-bolt splice spigotBracing Size (in): 1/2Bracing Type: Solid serpentineBrace Connection: WeldedEngineering: Pre-engineeredType of Line Support: Attach directly to bracing membersTower Type: BracketedWt. (lbs): 636.00Wgt. (kg.): 289.09