Toll Free 1.866.636.2487


Tripp Lite - SMART3000RMOD2U - Tripp Lite 3000VA 2880W UPS Smart Rackmount AVR 110V/120V/127V USB DB9 2URM

Tripp Lite - SMART3000RMOD2U - Tripp Lite 3000VA 2880W UPS Smart Rackmount AVR 110V/120V/127V USB DB9 2URM
Image is an illustration, may not reflect the exact product sold.

Tripp Lite - SMART3000RMOD2U - Tripp Lite 3000VA 2880W UPS Smart Rackmount AVR 110V/120V/127V USB DB9 2URM

Call For Stock
(Shipping delay possible)

3000VA / 3kVA 120V modular line interactive 2U rack / tower UPS for networks offers complete network-grade power protection with full support for hot-replacement of separate internal battery and electronics modules. High .96 power factor supports loads up to 2880 watts. High efficiency rating of 95% reduces electrical operating cost and BTU emissions. Offers selectable 110/120/127V 50/60Hz operation. Maintains battery derived sine wave AC output during power failures. Line-interactive dual-boost, single cut automatic voltage regulation (AVR) provides regulated 110/120/127V nominal output during brownouts and overvoltages. Includes NEMA L5-30P input plug and 7 UPS-supported output receptacles (6 x 5-15R, 1 x L5-30R). Includes two individually controllable load banks, for advanced remote-reboot and load-shedding applications. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB, DB9 serial and card slot for optional SNMPWEBCARD and other card accessories. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network interfaces at once. Advanced LED indicators offer 5-stage metering of UPS load and battery charge levels, plus single-LED status indicators for utility power, voltage regulation, on-battery, overload, replace battery and site wiring fault conditions. Audible alarms provide notification of on-battery, low-battery and overload conditions. Includes PowerAlert auto-shutdown and management software for complete monitoring, reporting and logging of all site and UPS operational conditions, plus support for advanced configurations involving load-shedding, remote-reboot and redundant dual-UPS applications. Internal batteries offer runtime of 11 minutes half load (1440 watts) and 4 minutes at full load (2880 watts). Runtime is expandable with optional BP72V15-2U (limit 1), BP72V28RT-3U (limit 4) and BP72V18-2US (limit 2) external battery packs. Supports installation in 4 post racks with included accessories. 2 post rackmount, wallmount and tower stand accessories sold separate.
  • 3000VA / 3kVA 120V modular line interactive 2U rack / tower UPS for networks
  • Hot-swappable power module and internal battery packs enables full UPS maintenance with zero-downtime
  • High power factor offers support for loads to 2880 watts
  • High efficiency line power operation of 95% reduces UPS electrical operating cost and BTU emissions

  • Output Capacity Details 2400W max capacity with external battery packs connected
  • Output Volt Amp Capacity (VA) 3000
  • Output kVA Capacity (kVA) 3
  • Output Watt Capacity (Watts) 2880
  • Output kW Capacity (kW) 2.9
  • Power Factor 1
  • Nominal Output Voltage(s) Supported 110V; 120V; 127V
  • Nominal Voltage Details 120V default
  • Frequency Compatibility 50 / 60 Hz
  • Output Voltage Regulation (Line Mode) 120V: -7% +9%, 110V: -8% + 11%, 127V: -9% +9%
  • Output Voltage Regulation (Battery Mode) +/-5%
  • Output Receptacles (6) 5-15R; (1) L5-30R
  • Load Management Receptacles Two switchable load banks - bank one consists of 2 5-15R outlets, bank 2 consists of 4 5-15R outlets
  • Output Circuit Breakers 15A (x2) - breaker 1 covers 2 5-15R outlets, breaker 2 covers 4 5-15R outlets, L5-30R outlet is unbreakered
  • Output AC Waveform (AC Mode) Pure Sine wave
  • Output AC Waveform (Battery Mode) Onda sinusoidal pura
  • Rated input current (Maximum Load) 24A
  • Nominal Input Voltage(s) Supported 110V CA; 120V CA; 127V CA
  • UPS Input Connection Type L5-30P
  • UPS Input Cord Length (ft.) 10 ft.
  • UPS Input Cord Length (m) 3.05
  • Recommended Electrical Service 30A 120V
  • Input Cord Length (ft.) 10
  • Input Cord Length (m) 3
  • Input Phase Monofsicos
  • Full Load Runtime (min.) 4 min. (2880w)
  • Half Load Runtime (min.) 11 min. (1440w)
  • Expandable Battery Runtime Extended runtime supported via optional external battery packs
  • DC System Voltage (VDC) 72
  • Battery Recharge Rate (Included Batteries) Less than 4 hours to 90% (typical, full load discharge)
  • Internal UPS Replacement Battery Cartridge RBC96-RMOD2U
  • Battery Access Front panel battery access door
  • Battery Replacement Description Hot-swappable, replaceable batteries
  • Alarm Cancel Operation Power-fail alarm can be silenced by pressing the on/test/mute switch
  • Audible Alarm Audible alarm indicates on battery, low battery and overload warnings
  • Site Wiring Fault Indication Includes site wiring fault LED
  • UPS AC Suppression Joule Rating 800 joules
  • EMI / RFI AC Noise Suppression S
  • AC Suppression Joule Rating 800
  • AC Suppression Response Time Instantaneous
  • Included Mounting Accessory Description 4 post rackmount installation accessories included
  • Primary Form Factor Rack
  • UPS Power Module Dimensions (hwd, in.) 3.5 x 17.5 x 24
  • Rack Height (U Spaces) 2
  • UPS Power Module Weight (lbs.) 87
  • UPS Shipping Dimensions (hwd / in.) 9.2 x 23.8 x 39.8
  • Shipping Weight (lbs.) 103.9
  • Shipping Weight (kg) 47.2
  • Cooling Method Fan
  • UPS Housing Material Steel
  • Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
  • Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
  • Relative Humidity 0 to 95%, non-condensing
  • AC Mode BTU / Hr. (Full Load) 515.4
  • Battery Mode BTU / Hr. (Full Load) 1594
  • AC Mode Efficiency Rating (100% Load) 0.95
  • Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
  • PowerAlert Software Included
  • Communications Cable USB, DB9 and EPO cabling included
  • Transfer Time 10 ms (line to battery) / 4 ms (battery to line)
  • Low Voltage Transfer to Battery Power (Setpoint) 90
  • High Voltage Transfer to Battery Power (Setpoint) 146
  • Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported

See other products in some related categories (click to browse):
AC Output Voltage < 120 V
AC Output Voltage Range < 110-130 V
AC Input Voltage Range < 110-130 V
AC Input Voltage < 120 V
Number of AC Outlets < 4 is where business goes shopping. With over 5 million products from 10,000+ manufacturers, we offer the largest B2B catalog on the internet (to our knowledge). We cater to the needs of all major verticals, small to large businesses, government, education and healthcare markets, as well as consumers. Through our extensive, carefully developed supplier and logistics network we have instant access to over $100 billion worth of inventory in hundreds of stocking warehouses nationwide. We ship to every state and to nearly 100 countries worldwide.

Our categories include Industrial & Scientific, MRO Products & Supplies, Laboratory & Science, Electronic Components, Occupational Health & Safety, Electronics, Computer & Photo, Access Control & Security, Wireless Carrier Infrastructure, Test & Maintenance, and thousands more. That said, the best way to find products on our website is via search. We are always expanding our catalog, with thousands of new products added daily. If you need something you don't see here, email us at , or call toll free 1.866.636.2487. Prospective new suppliers, please email .

We can send formal quotes or bids upon request. Please submit this form to request a quote. We often have volume discounts, government & education discounts and loyalty discounts. We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 3P0S1.

We are continually investing in people and systems to offer excellent customer service. See some customer testimonials here. You can reach our Customer Care team via email at , or call toll free 1.866.636.2487. The best way to request a return or order cancellation is to submit this form.

Also see: Categories, Products, Brands and Top Searches.

Creditcards Logos
Credit Card Processing
Acceptance Mark View Neobits, Inc. profile on Ariba Discovery