Toll Free 1.866.636.2487


Tripp Lite - MRV2012UL - Tripp Lite 2000W RV Inverter / Charger 120V 12VDC with Auto Transfer Switching Hardwired UL458 - 12V DC, 110V AC - 12V DC - Continuous Power:2000W"

Tripp Lite - MRV2012UL - Tripp Lite 2000W RV Inverter / Charger 120V 12VDC with Auto Transfer Switching Hardwired UL458 - 12V DC, 110V AC - 12V DC - Continuous Power:2000W"
Image is an illustration, may not reflect the exact product sold.

Tripp Lite - MRV2012UL - Tripp Lite 2000W RV Inverter / Charger 120V 12VDC with Auto Transfer Switching Hardwired UL458 - 12V DC, 110V AC - 12V DC - Continuous Power:2000W"

Call For Stock
(Shipping delay possible)

's Inverter/Charger is a heavy-duty, DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system that serves as an extended-run UPS, a standalone power source or an automotive inverter suitable for rugged RV applications. It provides equipment with utility- or generator-supplied AC electricity filtered through premium ISOBAR surge protection. It's the ideal, quiet alternative to gas generators.
The Inverter/Charger supplies up to 2000 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. It passes sine wave utility or generator power during battery charging and UPS line power operation, plus an efficient PWM sine wave AC output in inverter and UPS backup modes. When the hardwire AC input is energized, commercial power passes through to connected equipment and the battery bank is recharged via 3-stage charging system with user-selectable 25/100 amp charger output. In the UPS mode, it responds to blackouts and voltage fluctuations with a near-instantaneous automatic transfer to battery-derived AC output.
To provide the extra power needed to cold-start heavy-duty power tools and motorized equipment, the Inverter/Charger has an OverPower inverter output feature that temporarily provides up to 150% of the continuous output for up to 60 minutes and a DoubleBoost inverter output feature that delivers up to 200% of the continuous output for up to 10 seconds. With a reliable, large transformer design and frequency control, it can power resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.
  • serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
  • Supplies a 120V AC output from a 120V AC line power source or 12V DC battery source
  • 2000 watts continuous AC output in inverter mode, 3600 watts continuous AC output in AC line power mode Automatic Transfer
  • 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time
  • 3-stage battery charger with user-selectable 25/100 amp operation and adjustable settings for wet/gel battery types with charger on/off capability; offers fast, reliable battery recharging
  • Protected hardwire DC terminal posts safely accept heavy-gauge input wiring from attached battery bank
  • Protected hardwire output passes 120V line power or inverter output through to connected equipment
  • Extremely reliable large-transformer design tested to UL (USA & Canada) standards Overload / Overtemperature Protection
  • DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds
  • OverPower inverter output supports longer duration overloads to 150% for up to 60 minutes under ideal battery and temperature conditions.
  • Resettable 25A charger AC input breaker and variable-speed cooling fan protect the inverter from load- and temperature-related failures
  • Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
  • Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Operating Modes / Display LEDs
  • 3-position operating mode switch supports 'AUTO' mode
  • Six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
  • 4 configuration dip-switches support wet/gel battery charging profiles, charger enable/disable capability, selectable 75/85/95/105V AC low voltage auto transfer points during brownout conditions
  • Load-sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
  • Battery temperature sensor with 20 foot cable to prolong battery life by adjusting the charge level based on battery temperature
  • Automatic Generator Starter jack enables user configuration of automatic generator startup as inverter batteries drop to 11.5V DC and generator shutoff as inverter batteries are recharged to 14.1V DC Construction
  • Moisture-resistant construction enables vehicular operation in high-humidity environments

  • Nominal Output Voltage(s) Supported: 120V
  • Frequency Compatibility: 60 Hz
  • Output Receptacles: Hardwire
  • Output (Watts): 2000
  • Peak Output Capacity (Watts): 4000
  • Output Voltage Regulation: LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120V AC (+/-5%)
  • Output Frequency Regulation: 60 Hz (+/- 0.3 Hz)
  • Overload Protection: Includes 25A input breaker dedicated to the charging system
  • Nominal Input Voltage(s) Supported: 120V AC
  • Maximum Input Amps / Watts: DC INPUT: Full continuous load - 190A at 12V DC. AC INPUT: 38 amps at 120V AC with full inverter and charger load
  • Input Connection Type: DC INPUT: Set of 2 DC terminal posts. AC INPUT: hardwire. User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire
  • Voltage Compatibility (VAC): 120
  • Voltage Compatibility (VDC): 12
  • DC System Voltage (VDC): 12
  • Battery Charge: 25A /100A (user-selectable)
  • LVC (Low Voltage Cut-Off): 10V DC +/-3%
  • Expandable Runtime: Yes
  • Front Panel LEDs: 6 LEDs offer continuous status information on load and battery charge level
  • Switches: 3-position on/off/remote switch
  • Shipping Dimensions (hwd / in.): 13.5 x 15 x 21.5
  • Shipping Weight (lbs.): 46.6
  • Unit Dimensions (hwd / in.): 8 x 10.5 x 17.5
  • Unit Weight (lbs.): 43.2
  • Cooling Method: Multi-speed fan
  • Material of Construction: Polycarbonate/aluminum
  • Included Accessories: Battery temperature sensor cable; conduit hanger
  • Form Factors Supported: Mounting slots enable secure placement of inverter on any horizontal surface
  • Relative Humidity: 0-95% non-condensing
  • Transfer Time (Line Power to Battery Mode): 16.6 ms
  • Low Voltage Transfer to Battery Power: In AC 'auto' mode, inverter/charger switches to battery mode as line voltage drops to 75V
  • High Voltage Transfer to Battery Power: In AC 'auto' mode, inverter/charger switches to battery mode as line voltage increases to 145V
  • Load Sensing: Optional load-sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load-sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
  • Remote Control Capability: Yes
  • Product Warranty Period (Worldwide): 30-month limited warranty

Item Includes:
  • Inverter/Charger
  • Instruction manual with warranty information
  • Battery Temperature Sensor cable
  • Conduit hanger

  • 2.5 year

See other products in some related categories (click to browse):
  • Package Contents:
    • PowerVerter MRV2012UL Inverter
    • Instruction Manual
    • Battery Temperature Sensor Cable
    • Conduit Hanger
  • Product Type: Power Inverter
  • Output Voltage: 120 V AC
  • Output Voltage: 12 V DC
  • Product Type: Power Inverter
  • Input Voltage: 110 V AC
  • Input Voltage: 12 V DC
  • Manufacturer Part Number: MRV2012UL
  • Manufacturer Website Address:
  • Limited Warranty: 30 Month
  • Output Voltage: 120 V AC
  • Output Voltage: 12 V DC
  • Weight (Approximate): 43.20 lb
  • Waveform Type: Pulse-width Modulated Sine Wave
  • Manufacturer: Tripp Lite
  • Product Model: MRV2012UL
  • Product Name: PowerVerter MRV2012UL Inverter
  • Product Line: PowerVerter
  • Waveform Type: Pulse-width Modulated Sine Wave
  • Brand Name: Tripp Lite
  • Receptacles: Hardwired
  • Brand Name: Tripp Lite
  • Plug/Connector Type: Hardwired
  • Height: 8"
  • Width: 10.5"
  • Depth: 17.5"
  • Maximum Frequency: 60 Hz
  • Peak Power Load: 4000 W
  • Continuous Power Load: 2000 W is where business goes shopping. With over 5 million products from 10,000+ manufacturers, we offer the largest B2B catalog on the internet (to our knowledge). We cater to the needs of all major verticals, small to large businesses, government, education and healthcare markets, as well as consumers. Through our extensive, carefully developed supplier and logistics network we have instant access to over $100 billion worth of inventory in hundreds of stocking warehouses nationwide. We ship to every state and to nearly 100 countries worldwide.

Our categories include Industrial & Scientific, MRO Products & Supplies, Laboratory & Science, Electronic Components, Occupational Health & Safety, Electronics, Computer & Photo, Access Control & Security, Wireless Carrier Infrastructure, Test & Maintenance, and thousands more. That said, the best way to find products on our website is via search. We are always expanding our catalog, with thousands of new products added daily. If you need something you don't see here, email us at , or call toll free 1.866.636.2487. Prospective new suppliers, please email .

We can send formal quotes or bids upon request. Please submit this form to request a quote. We often have volume discounts, government & education discounts and loyalty discounts. We accept purchase orders from government and public education entities, as well as publicly traded corporations. CAGE Code: 3P0S1.

We are continually investing in people and systems to offer excellent customer service. See some customer testimonials here. You can reach our Customer Care team via email at , or call toll free 1.866.636.2487. The best way to request a return or order cancellation is to submit this form.

Also see: Categories, Products, Brands and Top Searches.

Creditcards Logos
Credit Card Processing
Acceptance Mark View Neobits, Inc. profile on Ariba Discovery