Obtainable in both PCI (A102) and PCI Express (A102-X) form factors, The A102 provides up to 8.2Mbps of full duplex data throughput or 60 voice calls over two T1 and or E1 lines to support high performance PCI-based routing and telephony systems. Advanced clocking features allow E1 and T1 lines to be mixed with full synchronization. As part of Sangoma's AFT range of products, the A102 makes use of the same high performance PCI interface that has been deployed in large quantities all over the world. The available A102d and A102d-X cards include Octasic's DSP hardware and certified algorithms providing carrier-grade echo cancellation and Voice Quality Enhancement (VQE) functions. Like all the Sangoma AFT family, the A102 is field upgradeable to take advantage of hardware and software improvements as they become available.

Note: This is a general discription of the product. See title or details for specific configuration.

VersionInterfaceDigital Signal Processor102PCIN/A102dPCIHardware echo canceller102-XPCI ExpressN/A102d-XPCI ExpressHardware echo canceller

See other products in some related categories (click to browse):

Telephony, PBX & VoIP > VoIP Hardware

Telephony, PBX & VoIP > VoIP Hardware > PSTN Cards for Asterisk

• Two T1/E1 ports with a single PCI interface for high performance voice and data applications.
• TDM clocking mode: Network timing can be passed from a network -connected
• DS0 to any or all of the other ports. Both T1 and E1 are supported simultaneously, making it possible to mix T1 channel banks and E1 networks with full channel synchronization.
• Line decoding: HDB3, AMI, B8ZS. Framing: CRC4, non-CRC4, ESF, D4T1/E1.
• Support for the Asterisk, OPAL Yate, FreeSwitch PBX/IVR projects, as well as other Open Source and proprietary PBX/Switch/IVR/VoIP gateway applications.
• All Sangoma's AFT products, including the A102 card use the same base PCI interface card, and the same professionally engineered firmware on the same family of Field Programmable Gate Arrays
• A102, A102d PCI: Fully PCI 2.2 compliant, compatible with all commercially available motherboards, proper interrupt sharing without manual tuning.
• A102-X, A102d-X PCI Express: 1 Lane PCI Express bus.
• Dimensions: 2U Form factor: 120mm x 55 mm for use in restricted chassis.
• Short 2U compatible mounting clips included for installation in 2U rackmount servers.
• High quality, tested RJ45 cables included. Power: 800mA peak, operational 300mA max at +3.3v or 5v.Temperature range: 0 50C. Autosense compatibility with 5v and 3.3v PCI busses.
• Intelligent hardware: Downloadable Field Programmable Gate Array programming with multiple operating modes. Field upgradeable so that new features related to voice and/or data can be added when they become available.
• 32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
• Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
• Supports Robbed Bit Channel Associated Signaling (CAS)and ISDN PRI.
• T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
• Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
• EDAC(patent pending) technology will be integrated to drastically reduce the cost of echo cancellation.
• Field upgradeable hardware allows for new TDM-related functions to be added as they become available.
• Raw bitstream interfaces can be used to support arbitrary non-standard line protocols such as non-byte aligned monosynch or bisynch.
• WAN data connection is supported by Sangoma's standard WANPIPE routing stack, and is completely independent of TDM voice application for total system reliability.
• WANPIPE supports certified, field tested and reliable Frame Relay, PPP, HDLC and X.25.