The PowerSense In-Line Power Hub provides a safe and efficient way to provide power to VoIP Phones, Wireless LAN Access Points, Web Cameras and other LAN Devices without the use of an external power supply for each device. Power is supplied over the existing LAN data cabling system. This greatly improves the range of installation locations for such devices, no longer requiring them to be located near a power outlet. It also adds an unprecedented level of safety and reliability for powered LAN devices.

The PowerSense Hub is a 3 slot rack-mount chassis powering up to 24 devices. A single slot shelf mount Hub is also available. Each 8 port module is Hot-swappable and modules may be added to the chassis without powering down the unit. If an individual power port is damaged due to a lightning strike or power surge, the module bank may be hot swapped out without powering down the chassis or disconnecting the other devices attached to the other power ports in the chassis.

When used with an uninterruptible power supply, the PowerSense Hub provides non-stop power for up to 24 connected devices. PowerSense is tough and durable, made from an all metal chassis. We build PowerSense right here in Silicon Valley, CA using ISO 9002 manufacturing processes. Our pledge to You is quality.

PowerSense operates on category 5, 5e or 6 grade LAN Data Cable at standard Ethernet distances. The BL-6000 series supports powered devices requiring the IEEE 802.3af Power over Ethernet Protocol or Cisco CDP style devices when using the optional 8858-01/02 PoE Connectors.

Features/Benefits:

• Hot swappable 8-port modules in the 19" rackmount ready chassis support IEEE 802.3af powered devices
• Each module is current limited for short circuit protection with power isolation of 1500 VRMS
• Each module auto-detects the power requirement for saftey and offers transparent 10/100Mb and management operations
• Each port has TWO diagnostic LED's as shown above
• Support for all compliant IEEE 802.3af powered devices
• Each module supplies full 15.4 watts for up 8 devices as per the IEEE 802.3af standard

• Chassis type: 19" Rackmount w/24 Ports
• Chassis size: 17.5W X 16.25D X 1.75H
• Module Type: Removable, hot swappable
• Weight: 20lbs. (9kg)

Certifications:

• Safety: UL 1950 and cUL
• Emissions: FCC Class A EN55022
• Class A EN55024, CE Mark (CISPR 22 Class A)
• Standards: P802.3af 802.3u

Interfaces:

• 24 Female RJ-45 Data input ports
• Shielded jacks for Category 5 UTP (two pair wire) or 100-ohm STP (two pair wire).
• Distance: 100 meters
• 24 Female RJ45 Data+Power over Ethernet output ports

LED Indicators / Module:

• Detect / Power Forwarding (blue)

Physical / Environmental:

• Operating Temperature 0 to 40 C ( 32 to 105 F)
• Storage Temperature -10 to 60 C ( 14 to 140 F)
• Relative Humidity 10% to 90% non-condensing
• Operating Altitude -1,000 to 10,000 feet

Electrical:

• AC Power Input
• Voltage: 90-264V Autoranging (46Hz - 63Hz)
• Connector: 3-pin with Ground
• Chassis Grounding: Yes
• Power Supply: Single
• Power Cord: Removable w/IEC plug
• DC Port Power Output
• Power Enabling:IEEE: IEEE 802.3af
• Power pins: Unused pairs, pins 4,5(+), 7,8(-)
• Max. Power/Port: 15.6W
• Max Power-all ports active: 24 15.6W
• Module to Module isolation: 1500V RMS
• Overload protection: If Current reaches400-450mA for 300-400 milliseconds, then the port shuts down.
• Module Power (green)