Description:
The SmartLink 4022 VoIP SoHo Router connects your LAN, standard analog phones, and fax to any IP network. This full-featured IP router includes VPN/Security and Quality of Service for converged low-cost sales-office/telecommuter voice data communications.
The SmartLink VoIP SoHo Router provides transparent connectivity for analog phones and faxes to the world of Internet voice. Connecting to any analog phone, fax or PBX, the SmartLink product is an effective and flexible solution for small offices and telecommuters to access Internet-based telephone services and corporate intranet systems across established LAN and Internet connections like xDSL and cable modems.
The SmartLink Model 4022 provides two RJ-45 Ethernet ports and two FXS (RJ-11) analog phone ports. Front panel LEDs quickly show at-a-glance the status of the system, LAN, WAN, and phone ports.
A full suite of IP features (DHCP, NAT/PAT, NTP and VPN) are available to LAN devices attached downstream. VLAN tagging and prioritization enables voice traffic to be handled before data traffic. Support for PPPoE and IPSEC tunneling simplifies extending corporate intranet services to remote teleworkers.
The web interface offers two levels of configuration access for the network operator and end user. The friendly web interface and product labeling (Phone, LAN, WAN etc.) to help ensure a trouble-free installation for the end user. Configuration and firmware can be downloaded from a TFTP server.
The SmartLink is SIP standard compliant, so it can be used with most SIP-based telephony services. Analog phones attached to the SmartLink can use such advanced voice calling features as call forwarding, caller ID, 3-way calling, call holding, call retrieval and call transfer
Back to Top
Features:
Voice Connectivity
- 2-wire Loopstart, RJ-11/12
- Short haul loop 1.1 km @3REN•
- Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation
Connectivity
- 2 10/100 Full Duplex/Autosensing Ethernet
RJ-45
Voice Processing (signalling dependent)
- SIP
- MGCP
- – Packet Cable NCS 1.0
- – IETF MGCP 1.0
- Voice codes
- – G.711 A-Law/μ-Law (64 kbps)
- – G.726 (ADPCM 40, 32, 24, 16 kbps)
- – G.723.1 (5.3 or 6.3 kbps)
- – G.729ab (8 kbps)
- G.168 echo cancellation
- 4 parallel voice connections
- DTMF detection and generation
- Carrier tone detection and generation
- Silence suppression and comfort noise
- Configurable dejitter buffer
- DTFM in-band & out-of-band
- Configurable transmit packet length
- RTP/RTCP (RFC 1889)
- STUN
Fax and Modem Support
- G.711 transparent FAX
- T.38 Fax relay (9.6 k, 14.4 k)
Voice Services/Features
- Anonymous CallerID block
- Call blocking
- Call forward—on busy
- Call forward—selective
- Call forward—unconditional
- Call hold/retrieve
- Call return
- Call transfer—blind
- Call transfer—with consultation
- Call waiting/retrieval
- Caller-ID
- Conference drop
- Conferencing (3-way calling)
- Distinctive ring
- Do not disturb
- Hotline calling
- Incoming CallerID on/off
- IP URL dialing
- Message waiting indication
- Self-caller ID block
- Speed dial
- Voicemail message retrieval
- Warmline calling
IP Services
- IPv4 router; RIPv1, v2 (RFC 1058 and 2453)
- IP filtering
- NAPT
- NTP
- DMZ
- DHCP client & server
- PPPoE
- PSEC VPN
- Programmable static routes
- ICMP redirect (RFC 792); Packet fragmentation
- DiffServe/ToS set or queue per header bits
- VLAN support 802.1p/q
- AES/DES/3DES Encryption
Management
- Browser configuration interface
- Multilevel security access
- TFTP & HTTP configuration & firmware loading
- SNMP v2 agent (MIB II and private MIB)
- Syslog support
Operating Environment
- Operating temperature: 0–40°C (32–104°F)
- Operating humidity: 5–80% (non condensing)
System
- Power: 100–240 VAC (50/60 Hz)
Compliance
- EMC compliance: EN55022 and EN55024
- Safety compliance: EN 50950
- CE compliance
- FCC Part 15 Class B
Back to Top
Specifications:
None Available.
Back to Top
|