Description:
The Multi-Tech MultiVOIP provides toll-free voice and fax communications over the Internet or Intranet. By integrating voice and fax into your existing data network, you can realize substantial savings on inter-office long distance toll charges. The MultiVOIP family is available in analog and digital models ranging from one to 60 ports. All MultiVOIP products connect directly to phones, fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office on your VOIP network.
Benefits:
- Toll bypass voice/fax communications
- PSTN voice quality
- Connects directly to phones, fax or PBX
- Turnkey solution
MultiVOIP Applications.
MultiVOIP is specifically targeted at businesses looking to reduce toll charges between frequently called sites. MultiVOIP is a voice over IP gateway that integrates seamlessly into your data network and operates alongside existing PBXs, or other phone equipment to simply extend voice capabilities to remote locations.
Easy Integration.
MultiVOIP simply plugs into your Ethernet network. Neither your phone service or network is placed at risk. Minimum requirements: Ethernet network, WAN connection, IP addresses.
Save Thousands of Dollars Each Month.
Even if your company uses one of the most inexpensive calling plans, a MultiVOIP network can quickly return your investment and begin paying you back.
Award-winning Voice Quality.
With MultiVOIP, you'll experience consistent toll-quality voice connections.
Interoperability.
MultiVOIP utilizes the H.323 and SIP protocols to provide complete interoperability with other Internet telephony solutions.
PSTN Fail-over.
PSTN fail-over allows MultiVOIP to automatically route calls over the PSTN network when the IP network is congested or completely down. MultiVOIP continues to monitor the connection and automatically switches back to the LAN/WAN once the conditions improve.
Complete Support for Multiple Telephony Interfaces.
Programmable FXS/FXO and an E&M interface for each port. This allows MultiVOIP to connect directly to a phone, fax machine, key phone system or PBX. It automatically detects whether the incoming call is a voice or fax call.
Bandwidth Management.
Bandwidth is used only when someone is speaking. Even at maximum compression, your VOIP solution will still provide toll-quality voice.
Management.
MultiVOIP is easily managed locally using a windows-based software application or remotely by the central office with a web browser or SNMP. It utilizes a Windows interface that makes it easy to view events like usage tracking, live use reporting, call history, and voice quality statistics. In addition, MultiVOIPManager eases administration by automatically e-mailing call logs based on volume or time.
No User Training.
Placing calls with MultiVOIP is like using your existing phone system.
Supplementary Services.
MultiVOIP supports H.450 supplementary services to provide for call transfer, call forwarding, call hold, call waiting, and name identification.
Back to Top
Features:
-
1-, 2-, 4-, 8- analog ports or 24/30 (expandable to 48/60) digital ports for communication over an existing IP network or the Internet
-
Ethernet connectivity and full IP compatibility with existing routers and WAN infrastructure
-
FXS/FXO and E&M connectors on each channel for direct analog connection to phones, key telephones, PBX extensions, PSTN lines or PBX trunks (MVP130 supports FXS and FXO)
-
Digital MultiVOIP connects directly to PBX or PSTN line via T1/E1 or PRI
-
Supports H.323 or SIP for sending voice over the Internet
-
Single Port Protocol (SPP) allows the use of dynamic IP addresses
-
PSTN fail-over automatically routes calls over the PSTN network if the IP network is down
-
Supports H.450 supplementary services to provide for call transfer, call forwarding, call hold, call waiting and name identification
-
Voice compression to 5.3K bps per call with support for multiple algorithms, including ITU G.723 and G.729
-
T.38 real-time fax relay for interoperability among other VOIP equipment
-
Configuration and management using a Web browser or Windows
-
Two-year warranty
Back to Top
Specifications:
- Analog Models
-
- Number of Ports: 1, 2, 4 or 8
- Port Interface: FXO, FXS & E&M support on each port (MVP130 supports FXS and FXO)
- FXS Interface: KTS, telephone set, or fax; ground and loop start
- FXO Interface: PBX station; CO line, loop start, 2-wire
- E&M Interface: PBX E&M trunk; 2- or 4-wire
- E&M Signal Types: I through V
- Dialing: DTMF or pulse
- Connectors: 1 RJ-48 (E&M); 1 RJ-11 (programmable FXS or FXO) per port
- Digital Models
-
- Number of Trunks: 1 or 2 (T1/PRI-24 or 48 Channels, E1/PRI-30 or 60 Channels)
- Signaling: T1-CAS/Robbed bit signaling; E1-MFC/R2, PRI-National ISDN 2, 4ESS, 5ESS, DMS100, Austel ISDN, ETSI, France Telcom, HK Telcom, NTT and KDD Japan, Korean Operator
- Line Code: T1-AMI or B8Zs; E1-AMI or HDB3
- Frame Format: T1-ESF or D4 (SF); E1-16 Frame plus CRC
- Connectors: 1 or 2 RJ-48
- LAN Port
-
- Format: Ethernet/Ethernet II or SNAP
- Interface: 10/100BaseT
- Command Port
-
- 1-, 2-Port & Digital Interface: RS-232C/D; RJ-45 (RJ-45 to DB9 cable included)
- 4- & 8-port Interface: RS-232C/D; DB25
- Speed & Format: 115.2K bps asynchronous
- Protocols
- H.323 V4, SIP, H.450.2-H.450.4, H.450.6 & H.450.8, RTP, RTCP, SMTP, Q.931, Q.Sig, T.38 & Group 3 fax relay, DTMF out-of-band (RFC Z833))
- Bandwidth Management
- G.711, G.723, G.726, G.727, G.729 & proprietary voice compression, silence suppression, VAD, CNG
- Voice Quality
- DiffServ, G.165, G.168, adaptive echo cancellation, forward error correction, bad frame interpolation, tunable latency, dynamic jitter buffers
- Management
- Web browser, Windows, SNMP agent, MultiVOIPManager, flash upgradeable
- Power
-
- Voltage & Frequency: 115v/240v AC, 47/60 Hz
- Power Consumption: 1-Port - 4.5W, 2-Port - 19W; 4- & 8-Port -4 6W; Digital models - 27W
- Dimensions
-
- 1-port model: 4.3" w x 1.0" h x 5.6" d; 8 oz.
(15.8 cm x 3.6 cm x 22.9 cm; 0.92 kg) - 2-port model: 6.2" w x 1.4" h x 9.0" d; 2 lbs.
(15.8 cm x 3.6 cm x 22.9 cm; 0.92 kg) - 4-port & 8-port model: 17.4" w x 3.8" h x 8.0" d; 7.4 lbs.
(44.2 cm x 9.5 cm x 20.3 cm; 3.4 kg) - Digital Model: 17.4" w x 1.75" h x 8.75" d; 7.5 lbs.
(44.2 cm x 4.5 cm x 22.2 cm; 3.4 kg)
- Certification
-
- EMC: FCC Part 15 Class A, EN55022, EN55024, EN61000-3-2, EN61000-3-3
- Safety: CE, UL 60950, EN60950, cUL, ACA TS-001
- Telecom: FCC Part 68, CS-03, TBR21
Back to Top
|
Broadband Phone Services, SIP Plans
