Item Details MSA Comfo-Cap Staz-On White Protective Cap With Staz-On Suspension has low-crown clearance to work in low-ceiling areas along with a convenient lamp cord and bracket. It has cross ridges on crown to provide enhanced strength and rigidity. It has custom imprinting and striping options. It comes in standard 6 - 1/2" to 8" sizes. It comes in a variety of colors and sizes. It comes in a white, yellow, gray, blue, orange, green, red and black colors. It is widely used in the mining industry due to its low-profile. It is designed for used if lateral protection is desired and is not specifically designed to provide protection against lateral blows from the front, side or rear. It complies or exceeds all applicable requirements for a Type I top impact helmet as outlined in electrical low voltage ANSI Z89.1-2003, Class G. Features Comes standard with lamp cord and bracket Low crown clearance for work in low ceiling areas Molded cross ridges on crown for increased strength and rigidity Available in a variety of colors and sizes Custom imprinting and striping available Head sizes 6 1/2 - 8" Specifications ANSI Z89.1 2009 Applications Food processes Asbestos abatement Painting Confined space Caution Ensure suspension sizes and helmet match by size. Do not mix suspension sizes and helmet sizes (i.e., putting a standard sized suspension in a large helmet or any other mismatched combination). Do not use competitor suspensions in MSA helmets. Use only the indicated MSA suspension in your MSA helmet. Failure to follow these instructions will reduce the energy absorbing ability of the protective helmet to receive impact, and could result in serious injury or death. Replace suspensions every 12 months from date of service. In the case of an impact, replace immediately This listing is for Each.
See other products in some related categories (click to browse):
Industrial & Scientific > Occupational Health & Safety > Safety > Head Protection