Item Details MSA V-Gard Green Protective Cap with Fas-Trac suspension to render durability. It comes in a variety of colors with custom imprinting and striping options. It also comes in a variety of sizes that has small from 6"to 7 1/8", standard from 6 1/2" to 8" and large 7" to 8 1/2". It has slotted construction to making it ideal for MSA accessories and also comes in non-slotted construction. Lightweight cap with polyethylene shell with self-adjusting crown straps to assure higher impact protection and comfortable fit. It can be used in food processes, asbestos abatement, agriculture, chemical, construction, mining, oil and gas, sanding and grinding. It is perfect for water/wastewater, welding, general industry, HVAC, confined space, food processes and painting. It allows you to use only MSAs suspensions designed for the Super-V helmet. It has some restrictions when used with mix suspension and helmet size thus only use MSA suspensions on an MSA caps or hats. It complies with type 1 class E ANSI/ISEA Z89.1-2009, CSA Z94.1-2005 and type 1 class E CSA Z94.1-2005 standards and also meets voluntary standard for low temperature. Official reverse donning logo is used to find out whether your hard hat may be worn backwards without voiding approvals. Features Polyethylene shell provides superior impact protection Self-adjusting crown straps ensure a comfortable fit Available in a variety of colors and sizes Hardhats with reverse donning logo may be worn backwards without voiding approvals Custom imprinting and striping available Four suspension options Head sizes 6 1/2 - 8" Specifications ANSI Z89.1 2009 CSA Z94.1 2005 Applications Food processes Asbestos abatement Painting Caution Suspension and helmet sizes must match(example: use only standard size suspension with standard size helmet). Otherwise, helmet protection ability will be reduced and may result in serious personal injury or death This helmet provides limited impact and penetration protection to top of head This helmet is not specifically designed to protect against front, side, or rear (that is, lateral) blows As an Industrial Protective Type I helmet, this helmet should be effective against small tools, bolts, rivets, and similar hazards. Some conditions can exceed this helmets capacity to protect against serious injury or death. Avoid areas where chance of severe impact or penetration exists CLASS E and G helmets provide limited electrical protection as outlined in ANSI/ISEA Z89.1-2009 and CSA Z94.1-2005. Class C helmets provide no electrical protection This listing is for Each.
See other products in some related categories (click to browse):
Industrial & Scientific > Occupational Health & Safety > Safety > Head Protection