HP ProCurve 10-GbE X2-SC LRM Optic (J9144A) An X2 form-factor transceiver that supports the 10-Gigabit LRM standard, providing 10-Gigabit connectivity up to 220 m on legacy multimode fiber. Ports 1 SC 10-GbE port (IEEE 802.3aq Type 10Gbase-LRM) Duplex: full only Physical characteristics Dimensions: 3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78 cm) Weight: 0.29 lb. (0.13 kg) Environment Operating temperature: 32F to 158F (0C to 70C) Non-operating/Storage temperature: -40F to 185F (-40C to 85C) Altitude: up to 10, 000 ft. (3 km) Cabling Type: *62.5/125 m or 50/125 m (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch cord may be needed in some multimode fiber installations) Maximum distance: *62.5 m multimode cable @ 160/500 MHz*km = 0.5-220 m *62.5 m multimode cable @ 200/500 MHz*km = 0.5-220 m *50 m multimode cable @ 400/400 MHz*km = 0.5-100 m *50 m multimode cable @ 500/500 MHz*km = 0.5-220 m *50 m multimode cable @ 1500/500 MHz*km = 0.5-220 m Notes 1310 nm serial optics For OM3 cable (50 m multimode @ 1500/500 MHz*km), a mode-conditioning patch cord is not required. Other multimode cables may require mode-conditioning patch cords to achieve the maximum distances listed above. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J9144A 10-GbE X2-SC LRM Optic" on the "ProCurve 10-GbE Transceivers" Manuals Web page.
See other products in some related categories (click to browse):
Electronics, Computer & Photo > Computers & Accessories > Networking Products > Network & Communication > Routing/Switching Devices > Modules