Ports 1 RJ-45 1000Base-T port (IEEE 802.3ab Type 1000Base-T)Duplex: full only Physical characteristics Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)Weight: 0.06 lb. (0.03 kg) CablingType: 1000Base-T: Category 5 (5E or better recommended), 100 differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000Base-T Maximum distance: 100 m Notes See the document titled "Support for the J8177C 1000Base-T Mini-GBIC, " on the "ProCurve Mini-GBICs and SFPs" Manuals Web page, for supported platforms and minimum software requirements to support this product. The J8177C gigabit copper mini-GBIC is not supported on dual-personality ports. The J8177C is capable of 100-Megabit operation. This is supported on only the ProCurve series 8200zl, 5400zl, and 6200yl switches using software version K.12.21 or later. Use the "auto-100" port setting to enable 100-Megabit operation. Important: The earlier J8177B does not support 100-Megabit operation! When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.
See other products in some related categories (click to browse):
Electronics, Computer & Photo > Computers & Accessories > Networking Products > Network & Communication > Routing/Switching Devices > Modules