CHANNEL VISION CABLE BOX COMBINER Maps modulated channel around cable box converter (-9dB loss).This device provides an alternative path for your modulated signal to flow around your cable box. Without it, most cable boxes will block themodulated signal. The signals entering the 3101 will include all cablesignals as well as your modulated signal. The signal is split into twobranches: one goes into the cable box, and the other flows through a filter that removes cable channels 2-25. The cable box will act as the tuner for all CATV programming, and its signal will be output on channel 3. The cable box output will be combined with the filtered output. The filtering is required to prevent the pre-existing channel 3 from interfering with the channel 3 created by the cable box. Your modulated signal will be higher than cable channel 25 and will not be affected by the CV3101 allows your modulated signals to be routed around the cable box and connected to the TVs RF input. Without the 3101, your signal may be blocked by the cable box. For many installations, the 3101 is modulated signals to bypass the cable boxSimple connectionsQuick and easy installationHS-2 splitter/combiners - splits the signal into 2 paths and recombinesthe signals after the cable High Pass filter - removes signals that are lower than 230MHz.
See other products in some related categories (click to browse):
Electronics, Computer & Photo > Home Audio & Theater > Custom Installation