Fast, fast, fast - for data/voice/video distribution! This patch cable ensures you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. The crossed pin configuration allows you to connect two computers peer-to-peer without the need for a hub or switch. You can also use the crossover cable to connect network switches and hubs without an uplink port to other switches and cable is fully tested and quality inspected, and meets all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. It drastically reduces both impedance and structural return loss (SRL) which ensures error-free transmission. Constructed from high quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) all-new molded, snagless clip prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain relief so that the cable is not damaged even when pulled excessively. Available in a variety of colors to easily color-code your network Note: This cable is for 10/100 ethernet only and will not work for gigabit ethernet since only two pairs of this cable are crossed.

See other products in some related categories (click to browse):

Electronics, Computer & Photo > Products To be Categorized

General Information Manufacturer:C2G Manufacturer Part Number:27865 Manufacturer Website Address: www.cablestogo.com Brand Name:C2G Product Name:Cat6 Cable Marketing Information:
Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met.
Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to the termination. Construction with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum.
Our all-new molded, snag-free "clip" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. Product Type:Network Cable Technical Information Cable Type:Category 6 Cable Length:25 ft Connector on First End:1 x RJ-45 Male Connector on Second End:1 x RJ-45 Male Conductor:Copper Physical Characteristics Color:Red Material:Polyvinyl Chloride (PVC) - Jacket Weight (Approximate):8.00 oz Miscellaneous Additional Information:

• Crossed pin configuration allows you to connect two computers "peer-to-peer" without the need for a hub or switch
Compatibility:
• Network switches and hubs without an uplink port
Certifications & Standards:
• TIA/EIA- 568-B-2.1
• Draft 9
Warranty Limited Warranty:Lifetime