Item Details Air Systems International 3-Outlet Low Pressure Breathing Air Compressor provides a maximum pressure of 15 psig at 12 CFM output. Compressor operates with 2 hood style respirators or 3 tight fitting constant flow masks as long as the combined flow requirements do not exceed 15 CFM output at 4 psig. It is prewired with an on/off switch and 115 VAC plug. Features Accommodates two hood-style respirators or three flow masks (tight fitting) provided that combined flow requirements are below 15cfm at 4 psi Maximum pressure - 15 psi at 12 cfm 15 cfm output at 4 psi CSA approved and thermally protected 1.5 HP electric motor, TEFC, 115 / 208 to 230 volts AC, 15.2 / 8.2 amps, 60 hertz, single phase 0.5 to 0.7 micron inlet and compressor filters Pressure gauge - 0 - 30psi Prewired an on/off switch & plug - 115 Volts AC plug only Weight 96 lbs Explosion-proof electronic motor (optional) available: Model BAC- 17EXP (230-460 volt AC, 3-phase motor) Specifications OSHA 1910.134 Caution Do not use kerosene or any oil based solvents for cleaning these compressors Do not lubricate oil less breathing air compressors. Do not run these air compressors in the wrong rotation Check the rotation arrow on the compressor if you are rewiring the electric motor Disconnect the power source before servicing the electric motor Do not run this compressor without connecting at least one hose and respirator to the manifold quick disconnect assembly Compressors must be used with constant flow, low pressure respirators only Pressure demand respirators will not operate on this compressor The breathing air compressor units can not be operated in an area that is immediately dangerous to life or health (IDLH) Up to 150 ft. (46 m) of extension tubing can be used to remote the intake snorkel Do not touch these surfaces until the unit has been shut off and allowed to cool This listing is for Each.
See other products in some related categories (click to browse):
Industrial & Scientific > Occupational Health & Safety > Safety > Respiratory