Stock Status: Call For Stock(shipping delay possible) Average lead time for this brand: 1-2 weeks. Specific products may vary.
ITEM #: 10573387 Features & Benefits : Goulds Pumps 1DM & 2DM Series Range of Product Features: Casing: Corrosion resistant AISI 304 SS designed for long lasting performance. Impeller: AISI type 304 stainless steel construction; two vane non-clog design for maximum pumping efficiency. Mechanical Seal: Drive lube silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber. Elastomers: BUNA-N Pump Support Feet: Motor Shell and...
ITEM #: 10573387 Features & Benefits : Goulds Pumps 1DM & 2DM Series Range of Product Features: Casing: Corrosion resistant AISI 304 SS designed for long lasting performance. Impeller: AISI type 304 stainless steel construction; two vane non-clog design for maximum pumping efficiency. Mechanical Seal: Drive lube silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber. Elastomers: BUNA-N Pump Support Feet: Motor Shell and Lifting Handle: Constructed of AISI type 304 series stainless steel. Shaft: AISI type 304 stainless steel high strength pump shaft with keyed and locking cap screw impeller fastening. Discharge: 1½' and 2' NPT for horizontal connection to rigid, flexible or guide rail piping connection. NOTE: See accessory section guide rail system s, type A10-20 for simplex or duplex system or base elbow rail systems. General Description : Goulds Model 1DM & 2DM 1 1 / 2' and 2' Submersible Sewage Pump • 1 1⁄2' discharge on 1⁄2 HP • 2' discharge on 3⁄4 HP and larger • Solid size: 13⁄8' solids on 1⁄2 HP; 2' solids on 3⁄4 HP and larger • Capacities: to 175 U.S. GPM (41 m3 / h) • Total heads: to 47 feet TDH (14 m) • Temperature: 104ºF (40ºC) continuous, 140ºF (60ºC) intermitten • Maximum submergence: to 17 feet (5 m) • AISI 304 SS casing • AISI 304 SS impeller • Continuous duty rated, non-overloading motor Motors : • Single phase: 60 Hz, 3450 RPM, 1⁄2 HP, 115 V; 1⁄2 to 1 HP, 230 V • Three phase: 60 Hz, 3450 RPM, 1⁄2 to 11⁄2 HP, 230 and 460 V • Non-overloading • Air-filled, class F insulated motor • Thermal overload protection: built-in with automatic reset on single phase, 115 V and 230 V models. • Three phase models require external overload in panel. • Power cord: 20 feet long • Single phase 115 V and 230 V models are supplied with molded NEMA plugs and built-in capacitors. • Three phase models are supplied with bare leads. • Float controls: optional, see accessory section for simplex or duplex system requirements. • Rotation is clockwise when viewed from top.